EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Structural Behavior and Failure Modes of Strengthened Deep Beams Using Fiber-Reinforced Polymers: A Review

Muhammad Aslam, Yong Jin iD, Qing Wang iD, Azlan Shah Ali

Polymers · 25.10.2026 · 18 (21) · 2642

DOI: 10.3390/polym18212642 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 25.10.2026. Verfasst von Muhammad Aslam und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, School of Architecture and Energy Engineering, Wenzhou University of Technology, Wenzhou 325000, Zhejiang, China. Die Arbeit nennt 111 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Deep beams (DBs) play a crucial role in structural systems due to the higher demand for flexural load-carrying capacity, but they also face challenges due to design complexities and stress patterns. This paper reviews the flexural performance of strengthened deep beams in near-surface mounted (NSM) and externally bonded reinforcement (EBR) techniques using steel, fiber-reinforced polymers (FRPs), and hybrid approaches. The analysis of compiled data from the literature focuses on strengthening materials and techniques, flexural behavior, the effect of reinforcement ratios, interfacial bonding, shear-span-to-depth ratios, stiffness, ductility, failure modes, cracking behavior, and analytical models. It was concluded that the hybrid strengthening technique and high-strength jacket techniques in the EBR method have proven to be highly effective for strengthening DBs for flexural behavior. Hybrid strengthening considering different grades of concrete and struts at a 45° angle showed 53–93% higher ultimate loads and 33–70% higher deflection compared to control solid deep beams. Carbon FRP (CFRP) strips and glass FRP (GFRP) fabrics in the hybrid technique NSM-EBR, combined for strengthening of DBs with openings, showed much better results; it increased the ultimate strength and deflections by about 52% compared to solid DBs without openings. Premature debonding and concrete-cover separation may prevent externally bonded reinforcement from achieving its maximum capacity. But an increase in the number of layers or the bonded length does not necessarily mean providing higher strength; the resistance of the surrounding concrete and adequate anchorage are equally crucial.

Schlagwörter

Stichwörter der Autor:innen

FRPsflexural behavioropeningsstrengthened deep beamsstrengthened openings

Autor:innen und Institutionen

  • Department of Civil Engineering, School of Architecture and Energy Engineering, Wenzhou University of Technology, Wenzhou 325000, Zhejiang, China.
  • School of Civil Engineering and Transportation, Guangzhou University, Guangzhou 510006, China.
  • Faculty of Built Environment, Universiti Malaya, Kuala Lumpur 50603, Malaysia.

ORCID-Profile: Yong Jin, Qing Wang

Zitieren

APA

Aslam, M., Jin, Y., Wang, Q., & Ali, A. S. (2026). Structural Behavior and Failure Modes of Strengthened Deep Beams Using Fiber-Reinforced Polymers: A Review. Polymers, 18(21), 2642. https://doi.org/10.3390/polym18212642

Vancouver

Aslam M, Jin Y, Wang Q, Ali AS. Structural Behavior and Failure Modes of Strengthened Deep Beams Using Fiber-Reinforced Polymers: A Review. Polymers. 2026;18(21):2642. doi:10.3390/polym18212642

BibTeX
@article{Aslam2026,
  author = {Aslam, Muhammad and Jin, Yong and Wang, Qing and Ali, Azlan Shah},
  title = {Structural Behavior and Failure Modes of Strengthened Deep Beams Using Fiber-Reinforced Polymers: A Review},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2642},
  doi = {10.3390/polym18212642}
}
Kostenlos starten →