EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Flexural Behavior of Reinforced Concrete Beams Strengthened with Basalt Fiber-Reinforced Polymer Sheets Using Carbon Nanotube-Modified Epoxy

Changchun Shi, Shengji Jin, Chengjie Wang, Yuhao Yang

Materials · 02.07.2024 · 17 (13) · 3250

DOI: 10.3390/ma17133250 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.07.2024. Verfasst von Changchun Shi und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, Key Science and Technology Project of Education Department of Liaoning Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The external bonding (EB) of fiber-reinforced polymer (FRP) is a usual flexural reinforcement method. When using the technique, premature debonding failure still remains a factor of concern. The effect of incorporating multi-wall carbon nanotubes (MWCNTs) in epoxy resin on the flexural behavior of reinforced concrete (RC) beams strengthened with basalt fiber-reinforced polymer (BFRP) sheets was investigated through four-point bending beam tests. Experimental results indicated that the flexural behavior was significantly improved by the MWCNT-modified epoxy. The BFRP sheets bonded by the MWCNT-modified epoxy more effectively mitigated the debonding failure of BFRP sheets and constrained crack development as well as enhanced the ductility and flexural stiffness of strengthened beams. When the beam was reinforced with two-layer BFRP sheets, the yielding load, ultimate load, ultimate deflection, post-yielded flexural stiffness, energy absorption capacity and deflection ductility of beams strengthened using MWCNT-modified epoxy increased by 7.4%, 8.3%, 18.2%, 22.6%, 29.1% and 14.3%, respectively, in comparison to the beam strengthened using pure epoxy. It could be seen in scanning electron microscopy (SEM) images that the MWCNTs could penetrate into concrete and their pull-out and crack bridging consumed more energy, which remarkably enhanced the flexural behavior of the strengthened beams. Finally, an analytical model was proposed for calculating characteristic loads and characteristic deflections of RC beams strengthened with FRP sheets, which indicated a reasonably good correlation with the experimental results.

Schlagwörter

Stichwörter der Autor:innen

basalt fiber-reinforced polymerepoxy resinflexural behaviormulti-wall carbon nanotubespremature debonding failurereinforced concrete beams

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870, China.
  • Department of Civil Engineering, Hebei University of Water Resources and Electric Engineering, Cangzhou 061001, China.
  • School of Architecture and Civil Engineering, Shenyang University of Technology, Shenyang 110870, China.

Förderung

  • the National Natural Science Foundation of China
  • Key Science and Technology Project of Education Department of Liaoning Province
  • National Natural Science Foundation of China

Zitieren

APA

Shi, C., Jin, S., Wang, C., & Yang, Y. (2024). Enhancing Flexural Behavior of Reinforced Concrete Beams Strengthened with Basalt Fiber-Reinforced Polymer Sheets Using Carbon Nanotube-Modified Epoxy. Materials, 17(13), 3250. https://doi.org/10.3390/ma17133250

Vancouver

Shi C, Jin S, Wang C, Yang Y. Enhancing Flexural Behavior of Reinforced Concrete Beams Strengthened with Basalt Fiber-Reinforced Polymer Sheets Using Carbon Nanotube-Modified Epoxy. Materials. 2024;17(13):3250. doi:10.3390/ma17133250

BibTeX
@article{Shi2024,
  author = {Shi, Changchun and Jin, Shengji and Wang, Chengjie and Yang, Yuhao},
  title = {Enhancing Flexural Behavior of Reinforced Concrete Beams Strengthened with Basalt Fiber-Reinforced Polymer Sheets Using Carbon Nanotube-Modified Epoxy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3250},
  doi = {10.3390/ma17133250}
}
Kostenlos starten →