EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hazelnut Shell-Talc-Carbon Black Hybrid High-Density Polyethylene Biocomposites: Formulation-Property Relationships for Potential Rigid Food-Packaging Applications

İdris Karagöz iD, Yeliz Karadeniz, Harun Sepetçioğlu iD, Volkan Daştan iD, Erdem Çınar iD

Polymers · 16.10.2026 · 18 (20) · 2546

DOI: 10.3390/polym18202546 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.10.2026. Verfasst von İdris Karagöz und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Materials Engineering, Faculty of Engineering, Yalova University, Yalova 77200, Türkiye. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: TÜBİTAK.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Agricultural residues offer opportunities to reduce virgin polymer consumption, although balancing mechanical performance, thermal stability, and processability in multicomponent composites remains challenging. This study developed high-density polyethylene (HDPE) hybrid biocomposites incorporating hazelnut-shell (HS) powder, talc, a carbonaceous additive, and maleic-anhydride-modified linear low-density polyethylene (LLDPE-g-MA) through sequential formulation. Mechanical, physical, processing, thermal, spectroscopic, and morphological properties were evaluated. The formulations exhibited distinct property trade-offs. The HS/talc formulation (PEHSCB4) achieved the highest flexural strength (38.87 MPa), 10.6% above neat HDPE, while maintaining comparable tensile strength. PEHSCB5 exhibited the highest tensile modulus (963.3 MPa) and Shore D hardness (71.8), whereas PEHSCB2 and PEHSCB3 achieved the highest V-notched impact strengths (~29 kJ/m2), compared with 12.78 kJ/m2 for neat HDPE. Melt flow rates ranged from 0.22 to 3.90 g/10 min, with all formulations remaining processable by extrusion and injection molding. Water absorption increased with HS incorporation but remained below 0.36% for all formulations after 240 h of immersion. Thermal analysis revealed formulation-dependent changes in crystallinity and initial degradation behavior. FTIR and SEM confirmed the polyethylene structure and heterogeneous multiphase morphologies. Overall, sequential formulation enabled property tailoring, supporting further evaluation for potential rigid food-packaging applications.

Schlagwörter

Stichwörter der Autor:innen

hazelnut shellhigh-density polyethylenehybrid biocompositesmelt processingrigid food packagingtalc

Autor:innen und Institutionen

  • Department of Polymer Materials Engineering, Faculty of Engineering, Yalova University, Yalova 77200, Türkiye.
  • Zamia Composite Research and Development Technology Joint Stock Company, ULUTEK Technopark, Nilüfer 16110, Türkiye.
  • Department of Chemical Engineering, Faculty of Engineering, Yalova University, Yalova 77200, Türkiye.
  • Department of Metallurgical and Materials Engineering, Faculty of Technology, Selçuk University, Konya 42075, Türkiye.
  • Research and Development Department, Alterna Gıda Sanayi Pazarlama ve Tic. A.Ş., Akçaburgaz Mah. 592. Sok. No: 8/2, Esenyurt 34522, Türkiye.

ORCID-Profile: İdris Karagöz, Harun Sepetçioğlu, Volkan Daştan, Erdem Çınar

Förderung

  • TÜBİTAK

Zitieren

APA

Karagöz, İ., Karadeniz, Y., Sepetçioğlu, H., Daştan, V., & Çınar, E. (2026). Hazelnut Shell-Talc-Carbon Black Hybrid High-Density Polyethylene Biocomposites: Formulation-Property Relationships for Potential Rigid Food-Packaging Applications. Polymers, 18(20), 2546. https://doi.org/10.3390/polym18202546

Vancouver

Karagöz İ, Karadeniz Y, Sepetçioğlu H, Daştan V, Çınar E. Hazelnut Shell-Talc-Carbon Black Hybrid High-Density Polyethylene Biocomposites: Formulation-Property Relationships for Potential Rigid Food-Packaging Applications. Polymers. 2026;18(20):2546. doi:10.3390/polym18202546

BibTeX
@article{Karagz2026,
  author = {Karagöz, İdris and Karadeniz, Yeliz and Sepetçioğlu, Harun and Daştan, Volkan and Çınar, Erdem},
  title = {Hazelnut Shell-Talc-Carbon Black Hybrid High-Density Polyethylene Biocomposites: Formulation-Property Relationships for Potential Rigid Food-Packaging Applications},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {20},
  pages = {2546},
  doi = {10.3390/polym18202546}
}
Kostenlos starten →