EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure–Property–Degradation Relationships in PHBV Biocomposites Filled with Cellulose, Walnut Shell, and Wood Fibres

Patrycja Szydłowska, Patrycja Bazan iD, Stanisław Kuciel iD

Materials · 31.10.2026 · 19 (21) · 4638

DOI: 10.3390/ma19214638 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2026. Verfasst von Patrycja Szydłowska und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Engineering and Physics, PK Krakow University of Technology, Jana Pawła II 37, 31-864 Kraków, Poland. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PHBV composites incorporating 10 and 20% by weight of cellulose, walnut shell particles, or wood filler were produced under consistent extrusion and injection-moulding conditions for comparative analysis. The study assessed morphology, wettability, water absorption, mechanical properties at 23 and 80 °C, thermal decomposition, and alterations in mechanical properties following exposure to a detergent solution at 60 °C. Among the mean values reported, PHBV 20W exhibited the highest modulus at 23 °C (7403 MPa), while PHBV 10C demonstrated the highest impact strength (8.9 kJ/m2). At a filler content of 20% by weight, the tensile strength was observed to be lower than that of the matrix. After 35 days, water absorption varied from 1.3% for PHBV to 14.7% for PHBV 20W. Thermogravimetric analysis (TGA) results revealed that the direction of the shift in the temperature at 5% mass loss was filler-dependent, with values ranging from 229.2 to 272.2 °C, compared to 267.2 °C for PHBV. Exposure to detergent resulted in reductions in strength and elongation, with PHBV 20R and 20W experiencing a marked decrease in modulus.

Schlagwörter

Stichwörter der Autor:innen

environmental ageinginterfacial morphologylignocellulosic reinforcementmechanical performancesurface wettabilitywater sorption

Autor:innen und Institutionen

  • Faculty of Materials Engineering and Physics, PK Krakow University of Technology, Jana Pawła II 37, 31-864 Kraków, Poland.
  • Interdisciplinary Center for Circular Economy, Cracow University of Technology, Warszawska 24, 31-155 Kraków, Poland.

ORCID-Profile: Patrycja Bazan, Stanisław Kuciel

Zitieren

APA

Szydłowska, P., Bazan, P., & Kuciel, S. (2026). Structure–Property–Degradation Relationships in PHBV Biocomposites Filled with Cellulose, Walnut Shell, and Wood Fibres. Materials, 19(21), 4638. https://doi.org/10.3390/ma19214638

Vancouver

Szydłowska P, Bazan P, Kuciel S. Structure–Property–Degradation Relationships in PHBV Biocomposites Filled with Cellulose, Walnut Shell, and Wood Fibres. Materials. 2026;19(21):4638. doi:10.3390/ma19214638

BibTeX
@article{Szydowska2026,
  author = {Szydłowska, Patrycja and Bazan, Patrycja and Kuciel, Stanisław},
  title = {Structure–Property–Degradation Relationships in PHBV Biocomposites Filled with Cellulose, Walnut Shell, and Wood Fibres},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4638},
  doi = {10.3390/ma19214638}
}
Kostenlos starten →