EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Heat Treatment Effects on Additively Manufactured Polymer Matrix Composites

Germán Omar Barrionuevo iD, Felipe Fernández iD, Yuvaraj Ravishankar Chappidi, Jorge Ramos-Grez, Wilson Navas-Pinto iD, Jonathan D Reyes-Ortiz iD, Duncan E Cree iD

Polymers · 08.10.2026 · 18 (19) · 2446

DOI: 10.3390/polym18192446 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 08.10.2026. Verfasst von Germán Omar Barrionuevo und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Universidad San Francisco de Quito USFQ, Diego de Robles y Vía Interoceánica, Quito P.O. Box 17-0901, Ecuador. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 123 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad San Francisco de Quito, Universidad de las Fuerzas Armadas ESPE, Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) of polymer matrix composites (PMCs) enables the fabrication of complex, structurally efficient parts, but the layer-wise thermal history intrinsic to processes such as material extrusion, vat photopolymerization, powder bed fusion, and direct ink writing leaves as-printed components in a metastable state: sub-equilibrium crystallinity or incomplete cure, interlayer porosity, weak interlaminar bonding, and locked-in residual stress. Post-fabrication heat treatments have positioned themselves as an attractive and straightforward strategy to address these deficiencies; however, the reported outcomes vary widely across material systems and treatment protocols. This review consolidates and analyzes the existing literature on heat treatment effects in AM-PMCs by organizing the different reported strategies into a taxonomy encompassing free and constrained annealing, pressure-assisted consolidation (including hot isostatic pressing and hot pressing), and post-curing processes for thermoset and photopolymers. The comprehensive literature review allowed identification of four coupled microstructural mechanisms, which govern the resulting property changes after the heat treatment: crystallization, interlayer/interface healing, porosity evolution, and residual stress relaxation. Post-treatment mechanical testing revealed that interlaminar shear strength exhibits the largest and most consistent improvement, while tensile and flexural performance respond differently depending on material systems and treatment conditions. Thermal and dimensional results are shown to be mechanistically coupled between heat deflection maximization temperature and shrinkage or warping minimization. Reinforcement type and matrix chemistry play a substantial role in modulating the treatment response, as continuous-fiber and carbon-fiber systems generally benefit most from pressure-assisted treatment. The present review concludes by identifying persistent gaps in protocol standardization, interlaminar or fatigue characterization, and reinforcement-treatment coupling studies, while outlining directions, including in situ consolidation and data-driven process-property modeling for future work.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingheat treatmentmechanical propertiespolymer matrix composites

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Universidad San Francisco de Quito USFQ, Diego de Robles y Vía Interoceánica, Quito P.O. Box 17-0901, Ecuador.
  • Faculty of Materials Science and Technology, Technische Universität Bergakademie Freiberg, Leipziger Straße 34, 09599 Freiberg, Germany.
  • Department of Mechanical and Metallurgical Engineering, School of Engineering, Pontificia Universidad Católica de Chile, Av. Vicuña Mackenna, Santiago 4860, Chile.
  • Departamento de Ciencias de la Energía y Mecánica, Universidad de las Fuerzas Armadas ESPE, Sangolquí 171103, Ecuador.
  • Centro de Nanociencia y Nanotecnología, Universidad de las Fuerzas Armadas ESPE, Sangolquí 171103, Ecuador.
  • Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, USA.

ORCID-Profile: Germán Omar Barrionuevo, Felipe Fernández, Wilson Navas-Pinto, Jonathan D Reyes-Ortiz, Duncan E Cree

Förderung

  • Universidad San Francisco de Quito
  • Universidad de las Fuerzas Armadas ESPE
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Barrionuevo, G. O., Fernández, F., Chappidi, Y. R., Ramos-Grez, J., Navas-Pinto, W., Reyes-Ortiz, J. D., & Cree, D. E. (2026). Heat Treatment Effects on Additively Manufactured Polymer Matrix Composites. Polymers, 18(19), 2446. https://doi.org/10.3390/polym18192446

Vancouver

Barrionuevo GO, Fernández F, Chappidi YR, Ramos-Grez J, Navas-Pinto W, Reyes-Ortiz JD, et al. Heat Treatment Effects on Additively Manufactured Polymer Matrix Composites. Polymers. 2026;18(19):2446. doi:10.3390/polym18192446

BibTeX
@article{Barrionuevo2026,
  author = {Barrionuevo, Germán Omar and Fernández, Felipe and Chappidi, Yuvaraj Ravishankar and Ramos-Grez, Jorge and Navas-Pinto, Wilson and Reyes-Ortiz, Jonathan D and Cree, Duncan E},
  title = {Heat Treatment Effects on Additively Manufactured Polymer Matrix Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {19},
  pages = {2446},
  doi = {10.3390/polym18192446}
}
Kostenlos starten →