Torsional resistance of additively manufactured continuous carbon fiber reinforced polymer composites
Journal of Reinforced Plastics and Composites · 20.09.2026
DOI: 10.1177/07316844261491782 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 20.09.2026. Verfasst von Mohammed Noor-A-Alam und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben.
Abstract (Originalsprache)
Continuous fiber-reinforced polymer composites represent a recent advancement in the additive manufacturing of fiber-reinforced materials. In this study, composites were fabricated using continuous carbon fiber reinforcement and a nylon-based polymer matrix known as Onyx. The composite composition was characterized using Fourier Transform Infrared Spectroscopy, and the microstructural features were examined using Scanning Electron Microscopy. The torsional resistance of the composites was evaluated in terms of the maximum shear stress obtained from the shear stress-strain curves. The effects of fiber volume fraction, fiber orientation, and infill pattern on the torsional performance of the composites were systematically investigated. Among the infill patterns examined, the triangular infill exhibited the highest torsional resistance. Therefore, all subsequent analyses were conducted using samples printed with a triangular infill pattern. The results indicated that increasing the fiber content enhanced the resistance to torque up to an optimal fiber volume fraction, beyond which a decreasing trend was observed. However, the corresponding shear strain at the maximum shear stress showed a decreasing trend with increasing fiber content. Furthermore, specimens with an isotropic fiber orientation demonstrated superior torsional resistance compared to those with a concentric fiber orientation.
Zitieren
APA
Noor-A-Alam, M., & Shabib, I. (2026). Torsional resistance of additively manufactured continuous carbon fiber reinforced polymer composites. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261491782
Vancouver
Noor-A-Alam M, Shabib I. Torsional resistance of additively manufactured continuous carbon fiber reinforced polymer composites. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261491782
BibTeX
@article{NoorAAlam2026,
author = {Noor-A-Alam, Mohammed and Shabib, Ishraq},
title = {Torsional resistance of additively manufactured continuous carbon fiber reinforced polymer composites},
journal = {Journal of Reinforced Plastics and Composites},
year = {2026},
doi = {10.1177/07316844261491782}
}
EUVIMED