EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Meniscus Morphology-Based Prediction of Backup Roll Eccentricity for Stable Slot-Die Coating on Polymer Films

Mingi Kim iD, Chanwoo Kim, Jeongdai Jo, Byungho Park, Changwoo Lee iD

Polymers · 17.08.2026 · 18 (16) · 2007

DOI: 10.3390/polym18162007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.08.2026. Verfasst von Mingi Kim und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Design and Production Engineering, Konkuk University, 120 Neungdong-ro, Seoul 05029, Republic of Korea. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, National Research Council of Science and Technology, Ministry of Trade, Industry & Energy (MOTIE) of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In roll-to-roll slot-die coating systems, backup roll eccentricity induces periodic fluctuations in key process parameters, leading to coating defects. Therefore, accurate prediction of backup roll eccentricity during operation is essential for maintaining stable coating quality. However, conventional methods based on web tension signals have limitations in clearly distinguishing and quantitatively evaluating subtle eccentricities. To address this issue, this study proposes a data-driven framework for predicting backup roll eccentricity using meniscus image information. Representative morphological features are defined to describe the global shape, local shape, and curvature characteristics of the meniscus. Since these features are sensitive to eccentricity-induced process variations, they can serve as effective indicators for eccentricity prediction. The defined features are used to train regression models, and the model with the highest predictive accuracy is selected. Experimental results confirm that the proposed meniscus-based approach significantly outperforms conventional tension-based methods. The proposed method achieves an average Root Mean Square Error (RMSE) of approximately 0.63 μm, an average Normalized Root Mean Square Error (NRMSE) of approximately 0.34, and a coefficient of determination (R2) greater than 0.93 across all test cases. These results demonstrate the feasibility of robust process monitoring using a simple vision sensor configuration.

Schlagwörter

Stichwörter der Autor:innen

meniscus morphologypolymer filmroll eccentricityslot-die coatingvision data

Autor:innen und Institutionen

  • Department of Mechanical Design and Production Engineering, Konkuk University, 120 Neungdong-ro, Seoul 05029, Republic of Korea.
  • Department of Advanced Battery Manufacturing Systems, Korea Institute of Machinery and Materials, 156 Gajeongbuk-ro, Daejeon 34103, Republic of Korea.
  • Flexible Production Systems Research Department, Korea Textile Machinery Convergence Research Institute, 27 Sampung-ro, Gyeongsan-si 38542, Republic of Korea.
  • Department of Mechanical Engineering, Konkuk University, 120 Neungdong-ro, Seoul 05029, Republic of Korea.

ORCID-Profile: Mingi Kim, Changwoo Lee

Förderung

  • Ministry of Trade, Industry and Energy
  • National Research Council of Science and Technology
  • Ministry of Trade, Industry & Energy (MOTIE) of Korea
  • National Research Council of Science & Technology

Zitieren

APA

Kim, M., Kim, C., Jo, J., Park, B., & Lee, C. (2026). Meniscus Morphology-Based Prediction of Backup Roll Eccentricity for Stable Slot-Die Coating on Polymer Films. Polymers, 18(16), 2007. https://doi.org/10.3390/polym18162007

Vancouver

Kim M, Kim C, Jo J, Park B, Lee C. Meniscus Morphology-Based Prediction of Backup Roll Eccentricity for Stable Slot-Die Coating on Polymer Films. Polymers. 2026;18(16):2007. doi:10.3390/polym18162007

BibTeX
@article{Kim2026,
  author = {Kim, Mingi and Kim, Chanwoo and Jo, Jeongdai and Park, Byungho and Lee, Changwoo},
  title = {Meniscus Morphology-Based Prediction of Backup Roll Eccentricity for Stable Slot-Die Coating on Polymer Films},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {16},
  pages = {2007},
  doi = {10.3390/polym18162007}
}
Kostenlos starten →