EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Process Window Optimization for Roll‐to‐Roll Slot‐Die Coating of High‐Resolution Dry Film Solder Resists for HDI PCB Applications

Geonu Kim, Woo Cheol Choi, Min Kwak, Jin Ho Shin, Jin Yong Seok, Ki‐Seok Jeon, Mincheol Chang, Chaehwan Jeong

Polymer Engineering & Science · 2026-06 · 66 (6) · 4095-4106

DOI: 10.1002/pen.70479 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 14.04.2026. Verfasst von Geonu Kim und 7 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Industrial Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As electronic devices trend toward high‐density interconnection (HDI) structures, ensuring thickness uniformity in solder resists has become a critical challenge for electronics engineers. This study focuses on continuous roll‐to‐roll slot‐die coating and aims to establish the hydrodynamic coating process window that enables stable film formation. Although initial trials exhibited hydrodynamic instabilities such as ribbing and streaking, a stable coating regime was identified within a coating gap of 65–80 μm and a pump flow rate of 7.0–8.0 mL min −1 , where the balance between viscous forces, capillary forces, and substrate motion stabilizes the coating bead. Under the optimized condition, a highly uniform functional layer with a target thickness of 26 μm (with a uniformity of ±3.74%) was achieved without observable coating defects. Crucially, atomic force microscopy showed a nanoscale average roughness of approximately 1.16 nm, and thermogravimetric analysis confirmed excellent thermal stability with a primary decomposition temperature of 412°C. Photolithographic evaluation further confirmed clear pattern formation and complete micro‐via opening without residual resist. These results demonstrate that identifying the hydrodynamic coating window is essential for stable slot‐die coating and provides practical guidelines for scalable manufacturing of high‐resolution dry‐film solder resists.

Förderung

  • Korea Institute of Industrial Technology

Zitieren

APA

Kim, G., Choi, W. C., Kwak, M., Shin, J. H., Seok, J. Y., Jeon, K., Chang, M., & Jeong, C. (2026). Process Window Optimization for Roll‐to‐Roll Slot‐Die Coating of High‐Resolution Dry Film Solder Resists for HDI PCB Applications. Polymer Engineering & Science, 66(6), 4095-4106. https://doi.org/10.1002/pen.70479

Vancouver

Kim G, Choi WC, Kwak M, Shin JH, Seok JY, Jeon K, et al. Process Window Optimization for Roll‐to‐Roll Slot‐Die Coating of High‐Resolution Dry Film Solder Resists for HDI PCB Applications. Polymer Engineering & Science. 2026;66(6):4095-4106. doi:10.1002/pen.70479

BibTeX
@article{Kim2026,
  author = {Kim, Geonu and Choi, Woo Cheol and Kwak, Min and Shin, Jin Ho and Seok, Jin Yong and Jeon, Ki‐Seok and Chang, Mincheol and Jeong, Chaehwan},
  title = {Process Window Optimization for Roll‐to‐Roll Slot‐Die Coating of High‐Resolution Dry Film Solder Resists for HDI PCB Applications},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {6},
  pages = {4095--4106},
  doi = {10.1002/pen.70479}
}
Kostenlos starten →