Tuning the Calcination Temperature of ZnO in Chitosan–Graphene Oxide/Epoxy Coatings for Optimized Corrosion Mitigation of Carbon Steel
Polymers · 11.08.2026 · 18 (16) · 1959
DOI: 10.3390/polym18161959 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.08.2026. Verfasst von Yasin Albarqouni und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob, Kuantan…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Malaysia Pahang Al-Sultan Abdullah.
Abstract (Originalsprache)
The corrosion-protection performance of zinc oxide-hybrid polymeric coatings is traditionally attributed to the individual contributions of their constituent phases. This study reveals that the calcination temperature of zinc oxide (ZnO) filler is a critical, previously overlooked processing parameter that dictates not only filler crystallinity but also the collective synergistic failure mechanism of the entire coating system. Herein, we demonstrate that incorporating ZnO calcined at 500 °C yields a ternary chitosan–graphene oxide–zinc oxide/epoxy (CS–GO–ZnO/EP) composite coating with a highly compact, dense morphology, minimal internal porosity, and exceptional filler dispersion, as validated by FTIR, XRD, and SEM analyses. The optimized CS–GO–ZnO/EP coating applied to carbon steel exhibits outstanding dry and wet pull-off adhesion strengths, the highest surface hydrophobicity (102.2°), and superior electrochemical barrier protection. Notably, after a 120-h immersion period in an aggressive 3.5 wt.% NaCl electrolyte, the CS–GO–ZnO/EP (500 °C) maintains excellent coating resistance (Rcoat = 1.06 × 105 Ω) and a minimized corrosion rate (CR = 0.074 mm/y). This thermal threshold is a key processing window that improves chemical bonding and compatibility between the different parts of the hybrid matrix without causing the severe nanoparticle sintering, phase aggregation, and micro-cracking that happen at 650 °C. This work offers a significant advancement in the design of eco-friendly, high-performance hybrid coatings, demonstrating that precise control of the inorganic phase’s thermal history provides a direct pathway toward superior durability, hydrophobicity, and electrochemical stability for carbon steel protection in aggressive marine environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Persiaran Tun Khalil Yaakob, Kuantan 26300, Pahang, Malaysia.
- Faculty of Applied Medical Sciences, Clinical Nutrition Department, Al-Azhar University-Gaza, Gaza City 1277, Palestine.
- School of Sustainable Engineering and the Built Environment, Arizona State University, Tempe, AZ 85287, USA.
- Korea Institute of Energy Technology (KENTECH), 21 KENTECH-gil, Naju 58330, Jeollanam-do, Republic of Korea.
ORCID-Profile: Yasin Albarqouni, Mohammad R Thalji, Arman Bin Abdullah
Förderung
- Universiti Malaysia Pahang Al-Sultan Abdullah
Zitieren
APA
Albarqouni, Y., Banius, E., Alfoudari, F., Alsulaiti, A., Thalji, M. R., & Abdullah, A. B. (2026). Tuning the Calcination Temperature of ZnO in Chitosan–Graphene Oxide/Epoxy Coatings for Optimized Corrosion Mitigation of Carbon Steel. Polymers, 18(16), 1959. https://doi.org/10.3390/polym18161959
Vancouver
Albarqouni Y, Banius E, Alfoudari F, Alsulaiti A, Thalji MR, Abdullah AB. Tuning the Calcination Temperature of ZnO in Chitosan–Graphene Oxide/Epoxy Coatings for Optimized Corrosion Mitigation of Carbon Steel. Polymers. 2026;18(16):1959. doi:10.3390/polym18161959
BibTeX
@article{Albarqouni2026,
author = {Albarqouni, Yasin and Banius, Euodia and Alfoudari, Farah and Alsulaiti, Aljoury and Thalji, Mohammad R and Abdullah, Arman Bin},
title = {Tuning the Calcination Temperature of ZnO in Chitosan–Graphene Oxide/Epoxy Coatings for Optimized Corrosion Mitigation of Carbon Steel},
journal = {Polymers},
year = {2026},
volume = {18},
number = {16},
pages = {1959},
doi = {10.3390/polym18161959}
}
EUVIMED