EUVIMEDEUVIMED entdecken
Crossref

Preparation and Anti‐Corrosion Performances of Nano‐ ZnO Modified Graphene Oxide‐Epoxy Resin Composite Coatings

Yongquan Zhang, Chengzhe Song

Polymer Composites · 20.02.2026 · 47 (4) · 3434-3445

DOI: 10.1002/pc.70364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 26.08.2025. Verfasst von Yongquan Zhang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Natural Science Foundation of Inner Mongolia Autonomous Region.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, graphene oxide (GO) and zinc oxide (ZnO) composite (EPGZnC) coatings were successfully prepared to improve the corrosion resistance of steel. The dispersion effect of GO in epoxy resin (EP) was improved by loading ZnO with three different contents (1/3/5 wt.‰) on the surface of GO. Based on the optimal fill of ZnO (5 wt.‰), the mechanical and corrosion protection properties of EPGZnC were investigated. Combined with microstructure and morphology analysis, the mechanical and corrosion improvement mechanism of 5 wt.‰ ZnO‐GO@EP was revealed. Compared with the resin matrix, the tensile strength and modulus of 3 wt.‰ GO@EP and 3 wt.‰ GO‐ZnO@EP were increased by 6.0%, 103.8% and 38.6%, 115.3%, respectively. Furthermore, compared with 1 wt.‰ ZnO‐GO@EP, the tensile modulus and elongation at break of 3 wt.‰ ZnO‐GO@EP and 5 wt.‰ ZnO‐GO@EP were increased by 39.7%, 98.9% and 69.9%, 127.8%, respectively. In addition, the tensile modulus and elongation at break of the 5 wt.‰ ZnO‐GO@EP film decreased by only 5.4% and 6.1%, respectively, compared with those before immersion in 3.5 wt.% NaCl solution, attributed to the fact that ZnO‐GO filled the internal pores of the resin, prolonging the corrosion path and hindering the entry of corrosive media such as H 2 O, O 2 , Cl − into the interior. It was worth noting that compared with pure EP coated‐steel, the corrosion current density of 3 wt.‰ GO@EP and 3 wt.‰ ZnO‐GO@EP coated‐steel was significantly reduced, with corresponding corrosion potentials increased by 8.5% and 24.7%, respectively.

Förderung

  • Natural Science Foundation of Inner Mongolia Autonomous Region

Zitieren

APA

Zhang, Y., & Song, C. (2026). Preparation and Anti‐Corrosion Performances of Nano‐ ZnO Modified Graphene Oxide‐Epoxy Resin Composite Coatings. Polymer Composites, 47(4), 3434-3445. https://doi.org/10.1002/pc.70364

Vancouver

Zhang Y, Song C. Preparation and Anti‐Corrosion Performances of Nano‐ ZnO Modified Graphene Oxide‐Epoxy Resin Composite Coatings. Polymer Composites. 2026;47(4):3434-3445. doi:10.1002/pc.70364

BibTeX
@article{Zhang2026,
  author = {Zhang, Yongquan and Song, Chengzhe},
  title = {Preparation and Anti‐Corrosion Performances of Nano‐ ZnO Modified Graphene Oxide‐Epoxy Resin Composite Coatings},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {4},
  pages = {3434--3445},
  doi = {10.1002/pc.70364}
}
Kostenlos starten →