Upgrading of Automotive Polymer Fractions Obtained by a Flotation Separation Process: Properties and Structure
Polymers · 05.08.2026 · 18 (15) · 1917
DOI: 10.3390/polym18151917 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 05.08.2026. Verfasst von Wiktoria Kanciak und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Technology, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2026 subsidy for the maintenance and development of research potential at the Faculty of Me-chanical Engineering, Poznan University of Technology, Faculty of Mechanical Engineering, Poznan University of Technology.
Abstract (Originalsprache)
This study investigated the upgrading process of polymer fractions obtained from automotive waste by a three-stage flotation–sedimentation separation process. The separated automotive recycled blend (ARB) fraction was modified with a compatibiliser at contents of 5, 10 and 15 wt%, and the resulting blends were processed by extrusion and injection moulding. Multipoint FTIR analysis confirmed the multicomponent character of the ARB fraction and indicated the presence of, among others, polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), high-density polyethylene (HDPE) and polystyrene (PS). The influence of compatibiliser addition on density, Shore D hardness, tensile properties, thermal behaviour and fracture-surface morphology was evaluated using gas pycnometry, static tensile testing, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The results showed that increasing compatibiliser content gradually reduced the density of the blends, while hardness remained at a level comparable to that of the reference material. Tensile testing indicated that the addition of the compatibiliser reduced Young’s modulus, whereas ultimate tensile strength and tensile stress at break were maintained close to the unmodified blend. Among the modified blends, the most favourable balance of the evaluated properties was observed for the ARB/10C sample containing 10 wt% compatibiliser. This blend exhibited the highest tensile stress at break among the investigated blends and a comparatively compact fracture-surface morphology. DSC analysis showed similar principal thermal transition ranges for all blends. The results indicate that 10 wt% compatibiliser is an optimal addition for upgrading recycled automotive polymer fractions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Technology, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland.
- Institute of Materials Engineering, Poznan University of Technology, Jana Pawła II 24, 60-965 Poznan, Poland.
ORCID-Profile: Wiktoria Kanciak, Dorota Czarnecka-Komorowska
Förderung
- 2026 subsidy for the maintenance and development of research potential at the Faculty of Me-chanical Engineering, Poznan University of Technology
- Faculty of Mechanical Engineering, Poznan University of Technology
Zitieren
APA
Kanciak, W., Czarnecka-Komorowska, D., & Popławski, M. (2026). Upgrading of Automotive Polymer Fractions Obtained by a Flotation Separation Process: Properties and Structure. Polymers, 18(15), 1917. https://doi.org/10.3390/polym18151917
Vancouver
Kanciak W, Czarnecka-Komorowska D, Popławski M. Upgrading of Automotive Polymer Fractions Obtained by a Flotation Separation Process: Properties and Structure. Polymers. 2026;18(15):1917. doi:10.3390/polym18151917
BibTeX
@article{Kanciak2026,
author = {Kanciak, Wiktoria and Czarnecka-Komorowska, Dorota and Popławski, Mikołaj},
title = {Upgrading of Automotive Polymer Fractions Obtained by a Flotation Separation Process: Properties and Structure},
journal = {Polymers},
year = {2026},
volume = {18},
number = {15},
pages = {1917},
doi = {10.3390/polym18151917}
}
EUVIMED