In Situ Synthesis, Crystallization Behavior and Mechanical Properties of Biodegradable Poly(Ethylene Succinate)/Talc Composites
Polymers · 24.07.2026 · 18 (15) · 1812
DOI: 10.3390/polym18151812 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.07.2026. Verfasst von He Yang und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Poly(ethylene succinate) (PES) is a promising biodegradable polyester with excellent thermal and mechanical properties; however, slow crystallization rate has seriously restricted its widespread application. PES/talc composites at low talc contents of 0.5 to 2.0 wt% were synthesized via an in situ polymerization method in this research. The chemical structure, thermal stability, crystallization behavior, crystalline morphology, crystal structure, and tensile mechanical properties of PES/talc composites were extensively investigated with various techniques and compared with those of neat PES. Talc remarkably enhanced the crystallization behavior of PES under different crystallization conditions as an effective nucleating agent. For instance, 2 wt% talc increased the melt crystallization temperature of PES from 46.1 to 58.9 °C at a cooling rate of 5 °C/min and shortened the crystallization half time to 1.95 min from 7.69 min at 66 °C. However, talc remained the crystallization mechanism and crystal structure of PES. The nucleation mechanism of talc on the crystallization of PES was further discussed. The exact nucleation mechanism was still uncertain, which needs further investigation. The mechanical properties of PES/talc composites were dependent on the talc content. For instance, 0.5 and 1 wt% talc decreased the tensile strength values to 34.1 ± 1.9 and 33.7 ± 2.1 MPa from 44.9 ± 1.3 MPa, while the elongation at break values increased to 675.3 ± 24.8% and 560.4 ± 11.9% from 508.0 ± 13.4%, respectively, indicating an increase in toughness. Although the mechanical properties of PES/talc2.0 (2 wt% talc) were inferior to those of neat PES and the other two composites, it still displayed relatively good mechanical properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China.
ORCID-Profile: Zhaobin Qiu
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Yang, H., Pan, S., & Qiu, Z. (2026). In Situ Synthesis, Crystallization Behavior and Mechanical Properties of Biodegradable Poly(Ethylene Succinate)/Talc Composites. Polymers, 18(15), 1812. https://doi.org/10.3390/polym18151812
Vancouver
Yang H, Pan S, Qiu Z. In Situ Synthesis, Crystallization Behavior and Mechanical Properties of Biodegradable Poly(Ethylene Succinate)/Talc Composites. Polymers. 2026;18(15):1812. doi:10.3390/polym18151812
BibTeX
@article{Yang2026,
author = {Yang, He and Pan, Siyu and Qiu, Zhaobin},
title = {In Situ Synthesis, Crystallization Behavior and Mechanical Properties of Biodegradable Poly(Ethylene Succinate)/Talc Composites},
journal = {Polymers},
year = {2026},
volume = {18},
number = {15},
pages = {1812},
doi = {10.3390/polym18151812}
}
EUVIMED