EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Poly(ethylene succinate- co -lactic acid) as a Multifunctional Additive for Modulating the Miscibility, Crystallization, and Mechanical Properties of Poly(lactic acid)

Yinbiao Feng, Cong Wang, Junjiao Yang iD, Tianwei Tan iD, Jing Yang iD

ACS Omega · 13.02.2024 · 9 (6) · 6578-6587

DOI: 10.1021/acsomega.3c07489 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 01.02.2024. Verfasst von Yinbiao Feng und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Resource Engineering, Beijing Key Laboratory of Bioprocess, College of Life Science and Technology, Beijing Universi…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Beijing University of Chemical Technology, Beijing Nova Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer blending offers an effective and economical approach to overcome the performance limitations of poly­(lactic acid) (PLA). In this study, a series of copolymers poly­(ethylene succinate-co-lactic acid) (PESL) were synthesized, featuring lactic acid (LA) contents that ranged from 20 to 86 wt %. This synthesis involved a one-pot industrial melt polycondensation process using succinic acid (SA), ethylene glycol (EG), and LA, catalyzed by titanium tetraisopropoxide (TTP). The goal was to produce a fully biobased copolymer expected to exhibit partial miscibility with pure poly­(lactic acid) (PLA). To assess the capability of PESL copolymers in toughening PLA, we conducted tensile testing on PLA/PESL blends containing 15 wt % PESL. As a result, an elongation at break for the blends with 15 wt % loading of the copolymer PESL72 was directly enhanced to 250% with an ultimate strength of 35 MPa, compared to brittle PLA with less 10% tensile length. The morphological features of interfacial adhesion before and after tensile failure were measured by scanning electron microscopy (SEM). A significant enhancement in the chain mobility of the PLA/PESL blends was further evidenced by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). These findings hold promise for the development of functional packaging materials based on PLA. The proposed copolymer design, which boasts strong industrial feasibility, can serve as a valuable guide for enhancing the toughness of PLA.

Autor:innen und Institutionen

  • State Key Laboratory of Chemical Resource Engineering, Beijing Key Laboratory of Bioprocess, College of Life Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China.
  • College of Chemistry, Beijing University of Chemical Technology, Beijing 100029, China.

ORCID-Profile: Junjiao Yang, Tianwei Tan, Jing Yang

Förderung

  • Beijing University of Chemical Technology
  • Beijing Nova Program

Zitieren

APA

Feng, Y., Wang, C., Yang, J., Tan, T., & Yang, J. (2024). Poly(ethylene succinate- co -lactic acid) as a Multifunctional Additive for Modulating the Miscibility, Crystallization, and Mechanical Properties of Poly(lactic acid). ACS Omega, 9(6), 6578-6587. https://doi.org/10.1021/acsomega.3c07489

Vancouver

Feng Y, Wang C, Yang J, Tan T, Yang J. Poly(ethylene succinate- co -lactic acid) as a Multifunctional Additive for Modulating the Miscibility, Crystallization, and Mechanical Properties of Poly(lactic acid). ACS Omega. 2024;9(6):6578-6587. doi:10.1021/acsomega.3c07489

BibTeX
@article{Feng2024,
  author = {Feng, Yinbiao and Wang, Cong and Yang, Junjiao and Tan, Tianwei and Yang, Jing},
  title = {Poly(ethylene succinate- co -lactic acid) as a Multifunctional Additive for Modulating the Miscibility, Crystallization, and Mechanical Properties of Poly(lactic acid)},
  journal = {ACS Omega},
  year = {2024},
  volume = {9},
  number = {6},
  pages = {6578--6587},
  doi = {10.1021/acsomega.3c07489}
}
Kostenlos starten →