EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimized design of porous dental implant structures based on triply periodic minimal surface (TPMS)

Songqing Chen iD, Xiaoying Liu, Chenjian Liao, Xiangzhen Chen, Huicai Lai, Jiancheng Lv

Biomedical Engineering / Biomedizinische Technik · 17.12.2025 · 70 (6) · 561-575

DOI: 10.1515/bmt-2025-0159 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Engineering / Biomedizinische Technik, online erschienen am 20.08.2025. Verfasst von Songqing Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Electromechanical and Automation, Huaqiao University, Xiamen, Fujian, China. Hauptthemen laut MEDLINE: Dental Implants, Titanium. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

This study aims to optimize the design of porous dental implants using triply periodic minimal surfaces (TPMS) to address stress shielding caused by elastic modulus mismatch between titanium implants and bone tissue, while enhancing osseointegration through controlled porosity.

Methods

Two TPMS architectures (D-type and G-type) were modeled via MathMod and Rhino software, with porosity controlled by parameter t. Finite element analysis (FEA) evaluated mechanical properties under porosities of 40 %, 60 %, and 80 %, and stress distribution in a patient-specific mandibular model under 200 N masticatory load.

Results

Both D- and G-type structures met mechanical requirements at ≤60 % porosity. The D-type exhibited optimal stress transfer at 60 % porosity, whereas G-type at 80 % porosity exceeded yield strength due to thin walls. Porous designs reduced cortical-cancellous bone stress differences by 30–50 %, mitigating stress shielding. The interconnected network facilitated bone ingrowth.

Conclusions

TPMS-based porous implants with 40–60 % porosity balance mechanical strength and stress distribution, offering personalized solutions for bone quality adaptation. Future work should validate long-term stability through in vitro experiments.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental ImplantsTitaniumPorosityHumansFinite Element AnalysisSurface PropertiesStress, MechanicalElastic ModulusOsseointegration

Stichwörter der Autor:innen

TPMSfinite element analysisporosityporous dental implantstress shielding

Substanzen

Dental ImplantsTitanium

Autor:innen und Institutionen

  • School of Electromechanical and Automation, Huaqiao University, Xiamen, Fujian, China.
  • Xiamen Medical University Affiliated Stomatological Hospital, Xiamen, Fujian, China.

ORCID-Profile: Songqing Chen

Zitieren

APA

Chen, S., Liu, X., Liao, C., Chen, X., Lai, H., & Lv, J. (2025). Optimized design of porous dental implant structures based on triply periodic minimal surface (TPMS). Biomedical Engineering / Biomedizinische Technik, 70(6), 561-575. https://doi.org/10.1515/bmt-2025-0159

Vancouver

Chen S, Liu X, Liao C, Chen X, Lai H, Lv J. Optimized design of porous dental implant structures based on triply periodic minimal surface (TPMS). Biomedical Engineering / Biomedizinische Technik. 2025;70(6):561-575. doi:10.1515/bmt-2025-0159

BibTeX
@article{Chen2025,
  author = {Chen, Songqing and Liu, Xiaoying and Liao, Chenjian and Chen, Xiangzhen and Lai, Huicai and Lv, Jiancheng},
  title = {Optimized design of porous dental implant structures based on triply periodic minimal surface (TPMS)},
  journal = {Biomedical Engineering / Biomedizinische Technik},
  year = {2025},
  volume = {70},
  number = {6},
  pages = {561--575},
  doi = {10.1515/bmt-2025-0159}
}
Kostenlos starten →