EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Morphology-Guided Screening of PLA/Cellulose Biocomposites for Melt-Spun Monofilaments: Micronized Eucalyptus Kraft Pulp Versus Microcrystalline Cellulose

Mário Pinto, Susana Gomes iD, Manuel Vieira, Juliana Silva iD, Alexandre Gaspar iD, Bruno F A Valente, Tomás Duarte, Paulo F Teixeira iD

Polymers · 22.07.2026 · 18 (14) · 1787

DOI: 10.3390/polym18141787 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.07.2026. Verfasst von Mário Pinto und 7 weiteren Autor:innen. Beteiligte Einrichtung: CeNTI-Centre for Nanotechnology and Advanced Materials, R. Fernando Mesquita 2785, 4760-034 Vila Nova de Famalicão, Portugal. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Recovery and Resilience Plan (PRR) and by the Next Generation EU European Funds, through the Green Agenda for Business Innovation "From Fossil to Forest - Sust…, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(lactic acid) (PLA) is a promising bio-based polymer for melt-spun fibres, but its low melt strength, brittleness and narrow processing window limit broader use. This study evaluates PLA/cellulose biocomposites for monofilament melt spinning by comparing micronized bleached Eucalyptus kraft pulp-derived fibres (P200) with microcrystalline cellulose (MCC) as a particulate reference, within a fixed compatibilizer/processing-aid formulation. Composites containing different cellulose contents were prepared by melt compounding and assessed by thermal analysis, oscillatory rheology, mechanical testing and fracture morphology; selected 5 wt.% formulations were then processed into monofilaments. Cellulose incorporation increased the onset degradation temperature of the PLA reference, while the rheological and mechanical responses depended strongly on reinforcement morphology. P200 promoted stronger low-frequency melt structuring, stiffness and crystallization tendency, but also a greater reduction in ductility, with notched impact strength decreasing significantly only at the highest P200 loading. MCC produced a more moderate composite-level response. Stable continuous monofilaments were obtained from both selected cellulose-containing formulations, although neither matched the drawable window or draw-induced mechanical development of the PLA reference formulation. Among the cellulose-containing systems, the 5 wt.% MCC formulation retained the more favourable balance between reinforcement and melt-spinning processability.

Schlagwörter

Stichwörter der Autor:innen

biocompositesbleached eucalyptus kraft pulpcellulose morphologymelt compoundingmelt spinningmicrocrystalline cellulosepoly(lactic acid)

Autor:innen und Institutionen

  • CeNTI-Centre for Nanotechnology and Advanced Materials, R. Fernando Mesquita 2785, 4760-034 Vila Nova de Famalicão, Portugal.
  • RAIZ-Forest and Paper Research Institute, Quinta de S. Francisco, Rua José Estevão (EN 230-1), 3800-783 Aveiro, Portugal.

ORCID-Profile: Susana Gomes, Juliana Silva, Alexandre Gaspar, Paulo F Teixeira

Förderung

  • Recovery and Resilience Plan (PRR) and by the Next Generation EU European Funds, through the Green Agenda for Business Innovation "From Fossil to Forest - Sust…
  • European Union

Zitieren

APA

Pinto, M., Gomes, S., Vieira, M., Silva, J., Gaspar, A., Valente, B. F. A., Duarte, T., & Teixeira, P. F. (2026). Morphology-Guided Screening of PLA/Cellulose Biocomposites for Melt-Spun Monofilaments: Micronized Eucalyptus Kraft Pulp Versus Microcrystalline Cellulose. Polymers, 18(14), 1787. https://doi.org/10.3390/polym18141787

Vancouver

Pinto M, Gomes S, Vieira M, Silva J, Gaspar A, Valente BFA, et al. Morphology-Guided Screening of PLA/Cellulose Biocomposites for Melt-Spun Monofilaments: Micronized Eucalyptus Kraft Pulp Versus Microcrystalline Cellulose. Polymers. 2026;18(14):1787. doi:10.3390/polym18141787

BibTeX
@article{Pinto2026,
  author = {Pinto, Mário and Gomes, Susana and Vieira, Manuel and Silva, Juliana and Gaspar, Alexandre and Valente, Bruno F A and Duarte, Tomás and Teixeira, Paulo F},
  title = {Morphology-Guided Screening of PLA/Cellulose Biocomposites for Melt-Spun Monofilaments: Micronized Eucalyptus Kraft Pulp Versus Microcrystalline Cellulose},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1787},
  doi = {10.3390/polym18141787}
}
Kostenlos starten →