Statistical Variability and Lower-Tail Performance Assessment of Tensile Properties in Flax, Jute, and Carbon Fiber Composite Laminates
Polymers · 16.07.2026 · 18 (14) · 1746
DOI: 10.3390/polym18141746 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 16.07.2026. Verfasst von Saurabh Tiwari und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia, Ministry of Education (MOE) and Gyeongsangbuk-do, Republic of Korea.
Abstract (Originalsprache)
Natural fiber-reinforced polymer composites are attractive for lightweight and sustainable engineering applications; however, property scatter remains a major barrier to reliable design. Mean tensile properties alone are insufficient when material selection depends on repeatability and lower-tail performance. This study presents a statistical variability and lower-tail reliability assessment of flax, jute, and carbon fiber composite laminates using 590 open-access tensile test records from a published natural-fiber composite dataset. Flax and jute were selected as representative bast-fiber systems covering a range of woven, unidirectional, and short-fiber architectures; carbon fiber was included as a synthetic-fiber reference system. Three mechanically important properties were analyzed: the recalculated tensile modulus, tensile strength, and axial failure strain. Normal, lognormal, and two-parameter Weibull distributions were screened for each material–property combination using the Akaike information criterion (AIC); empirical fifth percentiles (P5) and bootstrap 95% confidence intervals (CI) were computed as lower-tail descriptors. The results show that Carbon-0 has the highest lower-tail modulus and strength, with empirical fifth percentiles of 104.95 GPa and 989.64 MPa, respectively. Among the natural fiber systems, Flax-0 and Flax-VE-0 provided the highest lower-tail strengths, whereas Flax-Twill and Flax-CP showed the highest lower-tail failure strains. The lowest tensile strength coefficient of variation was observed for Flax-90 (2.41%), followed by Flax-Twill (3.43%), Flax-0 (4.50%), Jute-Satin (4.83%), and Jute-Plain (4.92%). A balanced reliability ranking that combined lower-tail property ranks and coefficient of variation ranks identified Flax-0, Flax-VE-0, Flax-Twill, Flax-CP, and Jute-Satin as the most favorable natural-fiber systems. The lower coefficient of variation values observed in aligned and satin-weave architectures relative to short-fiber and plain-weave systems reflect the role of fiber orientation uniformity in moderating property scatter at the laminate scale. This study provides a reproducible statistical framework based on lower-tail performance descriptors for comparative screening purposes, not on formal design allowables for distinguishing high mean performance from reliable minimum-level performance in natural fiber composite laminates.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.
- Department of Mechanical Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia.
- Institute of Materials Technology, Yeungnam University, Gyeongsan 38541, Republic of Korea.
ORCID-Profile: Saurabh Tiwari, Mohammad Faseeulla Khan, Nokeun Park
Förderung
- Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia
- Ministry of Education (MOE) and Gyeongsangbuk-do, Republic of Korea
Zitieren
APA
Tiwari, S., Lee, J., Khan, M. F., & Park, N. (2026). Statistical Variability and Lower-Tail Performance Assessment of Tensile Properties in Flax, Jute, and Carbon Fiber Composite Laminates. Polymers, 18(14), 1746. https://doi.org/10.3390/polym18141746
Vancouver
Tiwari S, Lee J, Khan MF, Park N. Statistical Variability and Lower-Tail Performance Assessment of Tensile Properties in Flax, Jute, and Carbon Fiber Composite Laminates. Polymers. 2026;18(14):1746. doi:10.3390/polym18141746
BibTeX
@article{Tiwari2026,
author = {Tiwari, Saurabh and Lee, Jongwon and Khan, Mohammad Faseeulla and Park, Nokeun},
title = {Statistical Variability and Lower-Tail Performance Assessment of Tensile Properties in Flax, Jute, and Carbon Fiber Composite Laminates},
journal = {Polymers},
year = {2026},
volume = {18},
number = {14},
pages = {1746},
doi = {10.3390/polym18141746}
}
EUVIMED