Enhanced Fracture Energy and Toughness of UV-Curable Resin Using Flax Fiber Composite Laminates
Biomimetics · 15.01.2026 · 11 (1) · 71
DOI: 10.3390/biomimetics11010071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 15.01.2026. Verfasst von Mingwen Ou und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Automotive Engineering, Hunan Electrical College of Technology, Xiangtan 411101, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Hunan Province, Scientific research project of Hunan Provincial Department of Education, Xiangtan science and technology planning project.
Abstract (Originalsprache)
Ultraviolet (UV) curable resins are widely used in photopolymerization-based 3D printing due to their rapid curing and compatibility with high-resolution processes. However, their brittleness and limited mechanical performance restrict their applicability, particularly in impact-resistant high-performance 3D-printed structures. Inspired by the mantis shrimp’s exceptional energy absorption and impact resistance, attributed to its helicoidal fiber architecture, we developed a Bouligand flax fiber-reinforced composite laminate. By constructing biomimetic helicoidal composites based on Bouligand arrangements, the mechanical performance of flax fiber-reinforced UV-curable resin was systematically investigated. The influence of flax fiber orientation was assessed using mechanical testing combined with the digital image correlation (DIC) method. The results demonstrate that a 45° interlayer angle of flax fiber significantly enhanced the fracture energy of the resin from 1.67 KJ/m2 to 15.41 KJ/m2, an increase of ~823%. Moreover, the flax fiber-reinforced helicoidal structure markedly improved the ultimate tensile strength of the resin, with the 90° interlayer angle of flax fiber exhibiting the greatest enhancement, increasing from 5.32 MPa to 19.45 MPa.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Automotive Engineering, Hunan Electrical College of Technology, Xiangtan 411101, China.
- The School of Environmental Art and Architecture, Changsha Environmental Protection Vocational College, Changsha 410004, China.
- School of Intelligent Equipment and Manufacturing, Hunan Electrical College of Technology, Xiangtan 411101, China.
- Department of Mechanical Engineering, University of Western Australia, Perth, WA 6009, Australia.
- College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China.
ORCID-Profile: Linmei Wu, Wubin Shan
Förderung
- Natural Science Foundation of Hunan Province
- Scientific research project of Hunan Provincial Department of Education
- Xiangtan science and technology planning project
- Guangxi Natural Science Foundation
Zitieren
APA
Ou, M., Li, H., Tan, D., Peng, Y., Zhong, H., Wu, L., & Shan, W. (2026). Enhanced Fracture Energy and Toughness of UV-Curable Resin Using Flax Fiber Composite Laminates. Biomimetics, 11(1), 71. https://doi.org/10.3390/biomimetics11010071
Vancouver
Ou M, Li H, Tan D, Peng Y, Zhong H, Wu L, et al. Enhanced Fracture Energy and Toughness of UV-Curable Resin Using Flax Fiber Composite Laminates. Biomimetics. 2026;11(1):71. doi:10.3390/biomimetics11010071
BibTeX
@article{Ou2026,
author = {Ou, Mingwen and Li, Huan and Tan, Dequan and Peng, Yizhen and Zhong, Hao and Wu, Linmei and Shan, Wubin},
title = {Enhanced Fracture Energy and Toughness of UV-Curable Resin Using Flax Fiber Composite Laminates},
journal = {Biomimetics},
year = {2026},
volume = {11},
number = {1},
pages = {71},
doi = {10.3390/biomimetics11010071}
}
EUVIMED