EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Crosslinked Waterborne Polyurethane Solid–Solid Phase Change Materials with Polyethylene Glycol for Thermoregulating Textiles

Hongjie Cao, Yanli Sun, Shaofeng Lu iD, Bo Li iD, Songcong Lin, Qiancheng Yang, Chengcheng Tian, Fan Zhang iD

Polymers · 12.07.2026 · 18 (14) · 1712

DOI: 10.3390/polym18141712 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.07.2026. Verfasst von Hongjie Cao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Textile Science and Engineering, Xi'an Engineering University, Xi'an 710048, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Qin Chuangyuan's "Scientists+Engineers" Team Construction Project of Shaanxi Provincial Government, FuXiaQuan National Independent Innovation Demonstration Zone Project for Developing Strategic Emerging Industries and Future Industries, Xi'an Scientists+Engineers Team Construction Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid–solid phase change materials integrate high heat storage, leak-proof performance, and dimensional stability, thereby positioning them as optimal candidates for thermoregulating textile applications. This study effectively synthesized PEG-based crosslinked waterborne polyurethane phase change materials (WPU-SSPCMs) with polyethylene glycol (PEG) as the soft segment, hexamethylene diisocyanate (HMDI) as the diisocyanate, and glycerol (GL) as the multifunctional chain extender. The effects of PEG molecular weight, diisocyanate type, chain-extension temperature, and monomer molar ratio on the phase transition behavior and thermal stability of WPU-SSPCMs were systematically investigated. The results indicate that at a PEG molecular weight of 2000, a chain-extension temperature of 70 °C, and a monomer molar ratio of n(PEG:HMDI:GL) = 1:2:0.67, the synthesized WPU-SSPCMs exhibited optimal comprehensive performance. The material demonstrated a melting temperature of 33.38 °C with a high enthalpy of 80.31 J/g. It displayed characteristic solid–solid phase transition behavior without evidence of liquid leakage during heating. Following 100 thermal cycles, the enthalpy variation remained below 1 J/g, indicating exceptional thermal and cycling stability. When applied to cotton fabric, the resultant thermoregulating textile displayed a buffering plateau during both heating and cooling processes, demonstrating a pronounced temperature-regulating effect relative to untreated fabric. The developed WPU-SSPCM holds considerable promise for applications in intelligent temperature regulation.

Schlagwörter

Stichwörter der Autor:innen

cross-network structurepolyurethanesolid–solid phase change materialthermoregulating textile

Autor:innen und Institutionen

  • School of Textile Science and Engineering, Xi'an Engineering University, Xi'an 710048, China.
  • Key Laboratory of Functional Textile Material and Product, Xi'an Polytechnic University, Ministry of Education, Xi'an 710048, China.
  • Key Laboratory of Functional Apparel Fabrics of Shaanxi Province, Xi'an 710048, China.
  • Fujian Techwork Textile Co., Ltd., Quanzhou 362700, China.

ORCID-Profile: Shaofeng Lu, Bo Li, Fan Zhang

Förderung

  • the Qin Chuangyuan's "Scientists+Engineers" Team Construction Project of Shaanxi Provincial Government
  • FuXiaQuan National Independent Innovation Demonstration Zone Project for Developing Strategic Emerging Industries and Future Industries
  • Xi'an Scientists+Engineers Team Construction Project
  • Quanzhou City Introduction of High level Talent Team Project
  • Key Laboratory Program of Shaanxi Provincial Education Department
  • Key Laboratory of Functional Textile Material and Product (Xi'an Polytechnic University), Ministry of Education
  • Qin Chuangyuan’s “Scientists+Engineers” Team Construction Project of Shaanxi Provincial Government
  • Xi’an Scientists+Engineers Team Construction Project

Zitieren

APA

Cao, H., Sun, Y., Lu, S., Li, B., Lin, S., Yang, Q., Tian, C., & Zhang, F. (2026). Crosslinked Waterborne Polyurethane Solid–Solid Phase Change Materials with Polyethylene Glycol for Thermoregulating Textiles. Polymers, 18(14), 1712. https://doi.org/10.3390/polym18141712

Vancouver

Cao H, Sun Y, Lu S, Li B, Lin S, Yang Q, et al. Crosslinked Waterborne Polyurethane Solid–Solid Phase Change Materials with Polyethylene Glycol for Thermoregulating Textiles. Polymers. 2026;18(14):1712. doi:10.3390/polym18141712

BibTeX
@article{Cao2026,
  author = {Cao, Hongjie and Sun, Yanli and Lu, Shaofeng and Li, Bo and Lin, Songcong and Yang, Qiancheng and Tian, Chengcheng and Zhang, Fan},
  title = {Crosslinked Waterborne Polyurethane Solid–Solid Phase Change Materials with Polyethylene Glycol for Thermoregulating Textiles},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1712},
  doi = {10.3390/polym18141712}
}
Kostenlos starten →