Polyethylene glycol/polylactic acid block co‐polymers as solid–solid phase change materials
SmartMat · 2023-06 · 4 (3)
DOI: 10.1002/smm2.1188 ↗Kurz gefasst
Fachartikel in der Zeitschrift SmartMat, online erschienen am 15.02.2023. Verfasst von Xiang Y. D. Soo und 13 weiteren Autor:innen. Die Arbeit wurde bisher 82-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Engineering Research Council.
Abstract (Originalsprache)
Phase change materials (PCMs) are promising thermal energy storage materials due to their high specific latent heat. Conventional PCMs typically exploit the solid–liquid (s–l) transition. However, leakage and leaching are common issues for solid–liquid PCMs, which have to be addressed before usage in practical applications. In contrast, solid–solid (s–s) PCMs would naturally overcome these issues due to their inherent form stability and homogeneity. In this study, we report a new type of s–s PCM based on chemically linked polyethylene glycol (PEG, the PCM portion) with polylactic acid (PLA, the support portion) in the form of a block co‐polymer. Solid‐solid latent heat of up to 56 J/g could be achieved, with melting points of between 44 °C and 55 °C. For comparison, PEG was physically mixed into a PLA matrix to form a PEG:PLA composite. However, the composite material saw leakage of up to 9% upon heating, with a corresponding loss in thermal storage capacity. In contrast, the mPEG/PLA block co‐polymers were found to be completely homogeneous and thermally stable even when heated above its phase transition temperature, with no observable leakage, demonstrating the superiority of chemical linking strategies in ensuring form stability.
Förderung
- Science and Engineering Research Council
Zitieren
APA
Soo, X. Y. D., Muiruri, J. K., Yeo, J. C. C., Png, Z. M., Sng, A., Xie, H., Ji, R., Wang, S., Liu, H., Xu, J., Loh, X. J., Yan, Q., Li, Z., & Zhu, Q. (2023). Polyethylene glycol/polylactic acid block co‐polymers as solid–solid phase change materials. SmartMat, 4(3). https://doi.org/10.1002/smm2.1188
Vancouver
Soo XYD, Muiruri JK, Yeo JCC, Png ZM, Sng A, Xie H, et al. Polyethylene glycol/polylactic acid block co‐polymers as solid–solid phase change materials. SmartMat. 2023;4(3). doi:10.1002/smm2.1188
BibTeX
@article{Soo2023,
author = {Soo, Xiang Y. D. and Muiruri, Joseph K. and Yeo, Jayven C. C. and Png, Zhuang M. and Sng, Anqi and Xie, Huiqing and Ji, Rong and Wang, Suxi and Liu, Hongfei and Xu, Jianwei and Loh, Xian J. and Yan, Qingyu and Li, Zibiao and Zhu, Qiang},
title = {Polyethylene glycol/polylactic acid block co‐polymers as solid–solid phase change materials},
journal = {SmartMat},
year = {2023},
volume = {4},
number = {3},
doi = {10.1002/smm2.1188}
}
EUVIMED