EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Generalized Strength Prediction Model for Timber Beams Strengthened Using NSM FRP Bars and FRP Sheets

Husain Abbas iD, Nadeem A Siddiqui, Mohammed S Shaik, Tarek Almusallam, Yousef Al-Salloum iD

Polymers · 10.07.2026 · 18 (14) · 1705

DOI: 10.3390/polym18141705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.07.2026. Verfasst von Husain Abbas und 4 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Research and Studies in Strengthening and Rehabilitation of Structures, Department of Civil Engineering, College of Engineering, King Saud U…. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ongoing Research Funding program-Research Chairs, King Saud Univer-sity, Riyadh, Saudi Arabia, Ongoing Research Funding program—Research Chairs, King Saud Univer-sity, Riyadh, Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Existing analytical models for Fiber-Reinforced Polymer (FRP)-strengthened timber beams are generally limited to individual strengthening techniques and cannot readily accommodate hybrid reinforcement systems. This study develops a generalized analytical model to predict the flexural capacity of timber beams strengthened with near-surface-mounted (NSM) FRP bars, externally bonded FRP sheets, or their hybrid combination within a unified theoretical framework. The model is formulated based on internal force equilibrium and strain compatibility, incorporating a constitutive model for timber with linear elastic tensile behavior and a bilinear compressive stress–strain relationship including post-peak softening. The generalized formulation can be readily adapted to different strengthening configurations through appropriate simplifications. The proposed model was validated against experimental results obtained from four-point bending tests on small-scale timber beams strengthened with NSM GFRP bars and externally bonded GFRP sheets. The analytical predictions showed good agreement with the experimental results, with differences generally ranging from 2% to 23%, demonstrating satisfactory predictive accuracy. The experimental results further showed that the hybrid strengthening system increased the flexural capacity of the timber beams by up to 84% compared with the unstrengthened control beams, while also improving stiffness, ductility, and overall structural response. Failure was primarily due to timber tensile rupture and longitudinal splitting, whereas the GFRP reinforcement remained effective without rupture, indicating efficient utilization of the strengthening system. The proposed generalized analytical model provides a practical and reliable design tool for predicting the flexural strength of timber beams strengthened with various FRP reinforcement configurations, thereby supporting the structural rehabilitation and sustainable retrofitting of timber structures.

Schlagwörter

Stichwörter der Autor:innen

CFRP/GFRPFRP strengtheninganalytical modelingbond behaviorcomposite strengtheninghybrid reinforcementnear-surface-mounted (NSM) techniquestrength predictionstructural retrofittingstructural timber beams

Autor:innen und Institutionen

  • Chair of Research and Studies in Strengthening and Rehabilitation of Structures, Department of Civil Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia.

ORCID-Profile: Husain Abbas, Yousef Al-Salloum

Förderung

  • Ongoing Research Funding program-Research Chairs, King Saud Univer-sity, Riyadh, Saudi Arabia
  • Ongoing Research Funding program—Research Chairs, King Saud Univer-sity, Riyadh, Saudi Arabia

Zitieren

APA

Abbas, H., Siddiqui, N. A., Shaik, M. S., Almusallam, T., & Al-Salloum, Y. (2026). Generalized Strength Prediction Model for Timber Beams Strengthened Using NSM FRP Bars and FRP Sheets. Polymers, 18(14), 1705. https://doi.org/10.3390/polym18141705

Vancouver

Abbas H, Siddiqui NA, Shaik MS, Almusallam T, Al-Salloum Y. Generalized Strength Prediction Model for Timber Beams Strengthened Using NSM FRP Bars and FRP Sheets. Polymers. 2026;18(14):1705. doi:10.3390/polym18141705

BibTeX
@article{Abbas2026,
  author = {Abbas, Husain and Siddiqui, Nadeem A and Shaik, Mohammed S and Almusallam, Tarek and Al-Salloum, Yousef},
  title = {Generalized Strength Prediction Model for Timber Beams Strengthened Using NSM FRP Bars and FRP Sheets},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1705},
  doi = {10.3390/polym18141705}
}
Kostenlos starten →