EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Mechanical and Thermal Performance of Injection-Molded PLA via Nucleation and Processing Optimization

Peng Gao, Max Johnson, Duncan Woodward, Nicholas Gajkowski iD, Mia Knipe, Anna Armstrong, Leia Kaminsky

Polymers · 28.06.2026 · 18 (13) · 1607

DOI: 10.3390/polym18131607 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.06.2026. Verfasst von Peng Gao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science Engineering, Western Washington University, Bellingham, WA 98225, USA. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Western Washington University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the effects of 2 wt% orotic acid (OA) nucleation and injection molding conditions on the crystallization behavior and thermo-mechanical performance of polylactic acid (PLA). Differential scanning calorimetry and X-ray diffraction revealed that 2 wt.% OA accelerates crystallization, enabling molded PLA to achieve crystallinity levels as high as 52–53% under low packing pressure and long hold time. Mechanical testing showed that tensile modulus increased with longer hold time, while tensile strength decreased due to constrained relaxation in the skin layer. Flexural strength increased with packing pressure, whereas flexural modulus decreased as the degree of crystallinity decreased under higher pressure conditions. Heat deflection temperature (HDT) showed the greatest sensitivity to processing, rising from 58 °C to 100–131 °C in optimized PLA–OA samples. The highest HDT values occurred under conditions that promoted both high crystallinity and extended lamellar development with strong α-phase formation. These results demonstrate that combining OA nucleation with controlled injection molding enables high-crystallinity, high-HDT PLA without post-annealing, offering a viable route for producing thermally stable PLA components suitable for hot-fill and reheatable food packaging applications.

Schlagwörter

Stichwörter der Autor:innen

crystallizationinjection moldingnucleating agentpolylactic acid

Autor:innen und Institutionen

  • Materials Science Engineering, Western Washington University, Bellingham, WA 98225, USA.
  • Polymer Science & Engineering, University of Southern Mississippi, Hattiesburg, MS 39406, USA.

ORCID-Profile: Nicholas Gajkowski

Förderung

  • Western Washington University

Zitieren

APA

Gao, P., Johnson, M., Woodward, D., Gajkowski, N., Knipe, M., Armstrong, A., & Kaminsky, L. (2026). Enhancing Mechanical and Thermal Performance of Injection-Molded PLA via Nucleation and Processing Optimization. Polymers, 18(13), 1607. https://doi.org/10.3390/polym18131607

Vancouver

Gao P, Johnson M, Woodward D, Gajkowski N, Knipe M, Armstrong A, et al. Enhancing Mechanical and Thermal Performance of Injection-Molded PLA via Nucleation and Processing Optimization. Polymers. 2026;18(13):1607. doi:10.3390/polym18131607

BibTeX
@article{Gao2026,
  author = {Gao, Peng and Johnson, Max and Woodward, Duncan and Gajkowski, Nicholas and Knipe, Mia and Armstrong, Anna and Kaminsky, Leia},
  title = {Enhancing Mechanical and Thermal Performance of Injection-Molded PLA via Nucleation and Processing Optimization},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1607},
  doi = {10.3390/polym18131607}
}
Kostenlos starten →