Influence of Reprocessing on the Properties of PVC-Based Wood–Plastic Composites
Polymers · 16.06.2026 · 18 (12) · 1509
DOI: 10.3390/polym18121509 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 16.06.2026. Verfasst von Dario Pervan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Forestry and Wood Technology, University of Zagreb, Svetošimunska Cesta 23, 10000 Zagreb, Croatia. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The reprocessing of wood–plastic composites (WPCs) significantly affects their structural integrity and thermal behavior. Despite this, the effect of reprocessing on PVC-based WPCs has not been extensively investigated, and the mechanism is not well understood. This study evaluated the effect of reprocessing on the properties of a PVC-based WPC. Small pieces of extruded WPC boards (2–4 mesh) were first milled to a granulation of 50 mesh, and then the material was reprocessed by compression molding, with part of the samples reinforced with glass- and carbon-fiber fabric. The physical and mechanical properties of the reprocessed material were analyzed, and the chemical and thermal characteristics of the reprocessed WPC were compared with the virgin WPC. The results of the mechanical and physical property tests showed that the reprocessed WPC had satisfactory properties compared with the virgin WPC. Samples reinforced with carbon-fiber fabric showed a statistically significant increase in tensile and flexural strength in comparison with unreinforced reprocessed WPC samples. Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) showed that partial dehydrochlorination, thermal degradation and a decrease in thermal stability occurred. Overall, the results of this study show that although chemical degradation and a decrease in thermal stability were present in the reprocessed WPC, it retained satisfactory mechanical and physical properties that could be improved by reinforcing it with carbon-fiber fabric.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Forestry and Wood Technology, University of Zagreb, Svetošimunska Cesta 23, 10000 Zagreb, Croatia.
ORCID-Profile: Nikola Španić
Zitieren
APA
Pervan, D., Brezović, M., & Španić, N. (2026). Influence of Reprocessing on the Properties of PVC-Based Wood–Plastic Composites. Polymers, 18(12), 1509. https://doi.org/10.3390/polym18121509
Vancouver
Pervan D, Brezović M, Španić N. Influence of Reprocessing on the Properties of PVC-Based Wood–Plastic Composites. Polymers. 2026;18(12):1509. doi:10.3390/polym18121509
BibTeX
@article{Pervan2026,
author = {Pervan, Dario and Brezović, Mladen and Španić, Nikola},
title = {Influence of Reprocessing on the Properties of PVC-Based Wood–Plastic Composites},
journal = {Polymers},
year = {2026},
volume = {18},
number = {12},
pages = {1509},
doi = {10.3390/polym18121509}
}
EUVIMED