EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Processing Properties of Plasticised PVC/Wood Composites

Krzysztof Lewandowski iD, Piotr Altmajer iD, Zuzanna Borkowska iD, Katarzyna Skórczewska iD

Polymers · 02.08.2024 · 16 (15) · 2204

DOI: 10.3390/polym16152204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 02.08.2024. Verfasst von Krzysztof Lewandowski und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Technology and Protective Coatings, Faculty of Chemical Technology and Engineering, Bydgoszcz University of Science and Technol…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science in Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents the results of testing the properties of wood–polymer composites (WPC) based on plasticised poly(vinyl chloride) (PVC-P). Materials with variable contents of wood filler (Arbocel C 320) or plasticiser (di-isononyl phthalate) were produced and then analysed. The share of wood flour in the material was up to 50 phr, and the plasticiser content was up to 40 phr. Functional properties, such as tensile properties, mechanical properties at variable temperature (DMTA), and water absorption, as well as processing properties such as rheological properties and analysis of the fusion process, were analysed. The influences of wood flour and plasticiser on the composites’ properties in the solid and melted state were found. For example, with 40 phr of plasticiser, increasing the filler share from 0 phr to 50 phr resulted in an increased tensile modulus from 18 MPa to 274 MPa and viscosity at a share rate of 20 s−1, from 721 Pa·s to 1581 Pa·s. However, increasing the share of plasticiser from 20 phr to 40 phr with 30 phr of filler reduces the value of these properties from 1760 MPa to 112 MPa and from 2768 Pa·s to 1151 Pa·s, respectively. It was also found that increasing the share of wood flour in the composite noticeably reduces the effectiveness of the plasticiser.

Schlagwörter

Stichwörter der Autor:innen

flexible compositessoft PVCwood–polymer composite

Autor:innen und Institutionen

  • Department of Polymer Technology and Protective Coatings, Faculty of Chemical Technology and Engineering, Bydgoszcz University of Science and Technology, Seminaryjna 3, 85-326 Bydgoszcz, Poland.

ORCID-Profile: Krzysztof Lewandowski, Piotr Altmajer, Zuzanna Borkowska, Katarzyna Skórczewska

Förderung

  • Ministry of Education and Science in Poland

Zitieren

APA

Lewandowski, K., Altmajer, P., Borkowska, Z., & Skórczewska, K. (2024). Mechanical and Processing Properties of Plasticised PVC/Wood Composites. Polymers, 16(15), 2204. https://doi.org/10.3390/polym16152204

Vancouver

Lewandowski K, Altmajer P, Borkowska Z, Skórczewska K. Mechanical and Processing Properties of Plasticised PVC/Wood Composites. Polymers. 2024;16(15):2204. doi:10.3390/polym16152204

BibTeX
@article{Lewandowski2024,
  author = {Lewandowski, Krzysztof and Altmajer, Piotr and Borkowska, Zuzanna and Skórczewska, Katarzyna},
  title = {Mechanical and Processing Properties of Plasticised PVC/Wood Composites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {15},
  pages = {2204},
  doi = {10.3390/polym16152204}
}
Kostenlos starten →