EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of 3D-Printed Nylon-Based Composites Reinforced with Continuous Carbon Fiber: Effect of Reinforcement Layer Distribution

Boyuan Ding, Jingjing Liu iD, Mouaz Al Kouzbary iD, Hanie Nadia Shasmin iD, Jingang Liu, Shengyan Ge, Noor Azuan Abu Osman iD

Polymers · 13.06.2026 · 18 (12) · 1491

DOI: 10.3390/polym18121491 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.06.2026. Verfasst von Boyuan Ding und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xiangtan University, Research Startup Fund of Xiangtan University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of continuous carbon fiber (CCF) can reinforce the mechanical properties of 3D-printed parts, but the effect of reinforcement layer distribution on composite performance remains unclear. This study investigates the effect of concentrated and separated distributions of CCF layers with different numbers of reinforcement layers. Tensile and flexural tests are conducted in accordance with ASTM D5083 and ASTM D790, respectively. Under the conditions of a solid-filled matrix (Onyx) and 0° CCF deposition, both concentrated and separated CCF layers improve several mechanical properties. Compared with pure Onyx, one-layer CCF increases the tensile modulus by about six times and more than doubles the tensile strength. Increasing the CCF volume leads to further increases in these properties. With concentrated three-layer CCF, the tensile modulus and tensile strength reach 7.153 ± 0.090 GPa and 109.045 ± 5.124 MPa, respectively. For flexural properties, separated two- and three-layer CCFs significantly improve the tangent modulus of elasticity from 0.467 ± 0.106 GPa for pure Onyx to 2.246 ± 0.333 GPa and 3.394 ± 0.081 GPa, respectively. This study also compares the tensile and flexural strength-to-weight ratio of all specimen groups and analyzes the failure mechanisms based on macroscopic fracture appearance. The results can provide guidance for selecting appropriate CCF layer distribution strategies to reinforce composites in different applications.

Schlagwörter

Stichwörter der Autor:innen

3D printFDMcontinuous carbon fiber reinforcementflexural propertieslayer distributiontensile properties

Autor:innen und Institutionen

  • School of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China.
  • Engineering Research Center of Complex Track Processing Technology & Equipment, Ministry of Education, Xiangtan University, Xiangtan 411105, China.
  • Key Laboratory of Dynamics and Reliability of Engineering Structures of College of Hunan Province, Xiangtan University, Xiangtan 411105, China.
  • Technology Innovation Center of Theater Technology and Performing Space Equipment Integration, Ministry of Culture and Tourism, Hunan Minghe Cultural Technology Group Co., Ltd., Changsha 410129, China.
  • Department of Mechanical and Mechatronic Engineering, Curtin University, Miri 98009, Malaysia.
  • Center for Applied Biomechanics, Department of Biomedical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia.

ORCID-Profile: Jingjing Liu, Mouaz Al Kouzbary, Hanie Nadia Shasmin, Noor Azuan Abu Osman

Förderung

  • Xiangtan University
  • Research Startup Fund of Xiangtan University

Zitieren

APA

Ding, B., Liu, J., Al Kouzbary, M., Shasmin, H. N., Liu, J., Ge, S., & Abu Osman, N. A. (2026). Mechanical Properties of 3D-Printed Nylon-Based Composites Reinforced with Continuous Carbon Fiber: Effect of Reinforcement Layer Distribution. Polymers, 18(12), 1491. https://doi.org/10.3390/polym18121491

Vancouver

Ding B, Liu J, Al Kouzbary M, Shasmin HN, Liu J, Ge S, et al. Mechanical Properties of 3D-Printed Nylon-Based Composites Reinforced with Continuous Carbon Fiber: Effect of Reinforcement Layer Distribution. Polymers. 2026;18(12):1491. doi:10.3390/polym18121491

BibTeX
@article{Ding2026,
  author = {Ding, Boyuan and Liu, Jingjing and Al Kouzbary, Mouaz and Shasmin, Hanie Nadia and Liu, Jingang and Ge, Shengyan and Abu Osman, Noor Azuan},
  title = {Mechanical Properties of 3D-Printed Nylon-Based Composites Reinforced with Continuous Carbon Fiber: Effect of Reinforcement Layer Distribution},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1491},
  doi = {10.3390/polym18121491}
}
Kostenlos starten →