EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ecocomposite Filaments from Spent Coffee Grounds for FFF 3D Printing: Material Properties and Printability

Jung-Tien Lo, Yu-Chen Chien iD, Teng-Chun Yang iD

Polymers · 10.06.2026 · 18 (12) · 1453

DOI: 10.3390/polym18121453 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.06.2026. Verfasst von Jung-Tien Lo und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Forestry, National Chung Hsing University, Taichung 402, Taiwan. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, spent coffee grounds (SCGs) were incorporated into polylactic acid (PLA) filaments and 3D-printed parts to investigate their effects on thermal, physical, and mechanical properties. Differential scanning calorimetry showed that SCG addition slightly reduced the glass transition temperature of PLA while markedly increasing its crystallinity, whereas thermogravimetric analysis revealed a moderate decrease in degradation onset temperature that remained well above the processing and printing temperatures, ensuring safe fabrication. Tensile testing indicated that SCG incorporation led to noticeable reductions in filament strength and stiffness, whereas the elongation at break was only weakly affected because of counteracting plasticization effects. For the printed parts, SCGs imparted a dark brown coloration, decreased density, and increased moisture uptake due to their porous and hydrophilic nature, while tensile, flexural, and impact strengths were reduced and the tensile modulus and elongation at break remained statistically similar across the 0–20 wt% range. These findings indicate that SCGs can be effectively incorporated to tailor the crystallinity, color, and density of PLA-based 3D-printed composites, albeit with trade-offs in strength and impact performance.

Schlagwörter

Stichwörter der Autor:innen

3D-printed biocompositesfused filament fabrication (FFF)mechanical propertiespolylactic acid (PLA)spent coffee grounds (SCGs)thermal properties

Autor:innen und Institutionen

  • Department of Forestry, National Chung Hsing University, Taichung 402, Taiwan.

ORCID-Profile: Yu-Chen Chien, Teng-Chun Yang

Förderung

  • National Science and Technology Council

Zitieren

APA

Lo, J. T., Chien, Y. C., & Yang, T. C. (2026). Ecocomposite Filaments from Spent Coffee Grounds for FFF 3D Printing: Material Properties and Printability. Polymers, 18(12), 1453. https://doi.org/10.3390/polym18121453

Vancouver

Lo JT, Chien YC, Yang TC. Ecocomposite Filaments from Spent Coffee Grounds for FFF 3D Printing: Material Properties and Printability. Polymers. 2026;18(12):1453. doi:10.3390/polym18121453

BibTeX
@article{Lo2026,
  author = {Lo, Jung-Tien and Chien, Yu-Chen and Yang, Teng-Chun},
  title = {Ecocomposite Filaments from Spent Coffee Grounds for FFF 3D Printing: Material Properties and Printability},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1453},
  doi = {10.3390/polym18121453}
}
Kostenlos starten →