EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Propagation Through Fins Made of Polymeric Materials Manufactured by 3D Printing

Florin Negoescu iD, Vasile Merticaru iD, Andrei Marius Mihalache iD, Vasile Ermolai iD, Oana Dodun iD, Nicolae-Răzvan Mititelu iD, Gheorghe Nagîț iD, Marius-Ionuț Rîpanu iD, Adelina Hrițuc iD, Laurențiu Slătineanu iD

Polymers · 26.05.2026 · 18 (11) · 1315

DOI: 10.3390/polym18111315 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.05.2026. Verfasst von Florin Negoescu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Machine Manufacturing Technology, "Gheorghe Asachi" Technical University of Iași, 700050 Iași, Romania. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate simultaneously both the effect of fin cross-sectional shape on heat transfer and the influence of different polymeric materials, test samples were manufactured by 3D printing in the form of bushings with attached radial fins of varying cross-sections. Through the research undertaken, the aim was to obtain information regarding the length of the fin at which a certain temperature is reached; therefore, the length that ensures efficient heat transfer to the external environment. Dedicated testing equipment was designed and built to test the thermal transfer in fins made of three different materials (polylactic acid (PLA)-based materials, i.e., standard PLA, PLA with carbon black (protopasta), and PLA with graphene (prografen)) and, respectively, with different sizes and shapes of the cross-section (circular, square, equilateral triangular, and rectangular). The experimental results were mathematically processed to develop empirical models that illustrate both the direction and the intensity of the influence of the input factors on the fin length at which a specific temperature is reached. Under certain conditions, radial components with a circular cross-sectional area of 20 mm2 showed significant differences depending on the polymer type. For the polylactic acid material, this length was 42% higher than for prografen and 25% higher than for protopasta.

Schlagwörter

Stichwörter der Autor:innen

different cross-sectionsdistance of heatingempirical mathematical modelfinsheating electrical resistanceinfrared camerapolymers

Autor:innen und Institutionen

  • Department of Machine Manufacturing Technology, "Gheorghe Asachi" Technical University of Iași, 700050 Iași, Romania.

ORCID-Profile: Florin Negoescu, Vasile Merticaru, Andrei Marius Mihalache, Vasile Ermolai, Oana Dodun, Nicolae-Răzvan Mititelu, Gheorghe Nagîț, Marius-Ionuț Rîpanu, Adelina Hrițuc, Laurențiu Slătineanu

Zitieren

APA

Negoescu, F., Merticaru, V., Mihalache, A. M., Ermolai, V., Dodun, O., Mititelu, N. R., Nagîț, G., Rîpanu, M. I., Hrițuc, A., & Slătineanu, L. (2026). Heat Propagation Through Fins Made of Polymeric Materials Manufactured by 3D Printing. Polymers, 18(11), 1315. https://doi.org/10.3390/polym18111315

Vancouver

Negoescu F, Merticaru V, Mihalache AM, Ermolai V, Dodun O, Mititelu NR, et al. Heat Propagation Through Fins Made of Polymeric Materials Manufactured by 3D Printing. Polymers. 2026;18(11):1315. doi:10.3390/polym18111315

BibTeX
@article{Negoescu2026,
  author = {Negoescu, Florin and Merticaru, Vasile and Mihalache, Andrei Marius and Ermolai, Vasile and Dodun, Oana and Mititelu, Nicolae-Răzvan and Nagîț, Gheorghe and Rîpanu, Marius-Ionuț and Hrițuc, Adelina and Slătineanu, Laurențiu},
  title = {Heat Propagation Through Fins Made of Polymeric Materials Manufactured by 3D Printing},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1315},
  doi = {10.3390/polym18111315}
}
Kostenlos starten →