Pressure-Dependent Mechanical Behavior and Surface Degradation of Fluorocarbon Elastomer (FKM): Insights into Structure–Property Relationships Under Hydrogen Exposure
Polymers · 21.05.2026 · 18 (10) · 1253
DOI: 10.3390/polym18101253 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.05.2026. Verfasst von Nitesh Subedi und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Aerospace and Mechanical Engineering, University of Oklahoma, Norman, OK 73019, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the pressure-dependent mechanical behavior and surface degradation of fluorocarbon elastomer (FKM, Viton®) O-ring seals following prolonged high-pressure hydrogen exposure. Specimens were aged at up to 7000 psi for 192 h and evaluated using tensile testing and optical image analysis. The results show a non-monotonic evolution of peak force, stiffness, and energy absorption, with increased load-bearing response at higher pressures accompanied by reduced displacement capacity. Normalized force–displacement behavior shows broadly similar loading profiles across pressure conditions; however, this representation is used for comparative visualization and does not establish preservation of the deformation mechanism. Image-based analysis reveals a significant increase in micro-defect density and surface heterogeneity with pressure, suggesting increased formation of surface micro-defects. These findings highlight pressure-dependent changes in polymer network response and surface morphology under hydrogen exposure. The study provides insights into structure–property relationships governing elastomer performance in hydrogen environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aerospace and Mechanical Engineering, University of Oklahoma, Norman, OK 73019, USA.
ORCID-Profile: Nitesh Subedi, Md Monjur Hossain Bhuiyan, Zahed Siddique
Zitieren
APA
Subedi, N., Corral, A. B., Bhuiyan, M. M. H., Islam, M. A., & Siddique, Z. (2026). Pressure-Dependent Mechanical Behavior and Surface Degradation of Fluorocarbon Elastomer (FKM): Insights into Structure–Property Relationships Under Hydrogen Exposure. Polymers, 18(10), 1253. https://doi.org/10.3390/polym18101253
Vancouver
Subedi N, Corral AB, Bhuiyan MMH, Islam MA, Siddique Z. Pressure-Dependent Mechanical Behavior and Surface Degradation of Fluorocarbon Elastomer (FKM): Insights into Structure–Property Relationships Under Hydrogen Exposure. Polymers. 2026;18(10):1253. doi:10.3390/polym18101253
BibTeX
@article{Subedi2026,
author = {Subedi, Nitesh and Corral, Alfredo Becerril and Bhuiyan, Md Monjur Hossain and Islam, Md Ariful and Siddique, Zahed},
title = {Pressure-Dependent Mechanical Behavior and Surface Degradation of Fluorocarbon Elastomer (FKM): Insights into Structure–Property Relationships Under Hydrogen Exposure},
journal = {Polymers},
year = {2026},
volume = {18},
number = {10},
pages = {1253},
doi = {10.3390/polym18101253}
}
EUVIMED