EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Characterization of Thermomechanically Treated and Untreated Banana Rachis Fiber/PLA Composites for Material Extrusion Additive Manufacturing

Elena Monzón, Pablo Bordón iD, Quim Tarrés iD, Mario Monzón iD, Rubén Paz iD

Polymers · 06.05.2026 · 18 (9) · 1144

DOI: 10.3390/polym18091144 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.05.2026. Verfasst von Elena Monzón und 4 weiteren Autor:innen. Beteiligte Einrichtung: Integrated and Advanced Manufacturing Research Group, University of Las Palmas de Gran Canaria, 35017 Las Palmas, Spain. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AEI/10.13039/501100011033 and European Union "NextGenerationEU"/PRTR, Canary Islands Government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a biodegradable composite based on PLA reinforced with banana rachis fiber—derived from agricultural waste and forming the structural core of banana bunches—is developed. The fibers are evaluated with and without thermomechanical processing to enhance the properties of parts produced through material extrusion additive manufacturing (MEX), a technology with a screw feeding system. A preliminary study of the additive manufacturing process is conducted to ensure adequate processability of the matrix during the process. In addition, different composite formulations (0, 5, 10 and 15 wt.% fiber) are analyzed through morphological, thermal (TGA and DSC), rheological, and mechanical characterization, complemented by SEM analysis. This comprehensive characterization revealed that the incorporation of WTP fibers served to reinforce the PLA matrix for the tensile modulus, from 2273.54 ± 123.66 MPa to 2612.51 ± 95.16 MPa with 15% of WTP fiber. A similar trend was observed for the flexural modulus, which increased from 2456 ± 61.16 MPa in the neat PLA to 3189.68 ± 52.24 MPa for the PLA-15% WTP composite. The results demonstrate the feasibility of the process and the production of parts with acceptable quality under appropriate manufacturing conditions.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbanana rachis fiberbiodegradable compositesmaterial extrusionnatural fibernatural fiber compositespolylactic acidsustainable composites

Autor:innen und Institutionen

  • Integrated and Advanced Manufacturing Research Group, University of Las Palmas de Gran Canaria, 35017 Las Palmas, Spain.
  • LEPAMAP-PRODIS Research Group, University of Girona, C/Maria Aurèlia Capmany 61, 17003 Girona, Spain.

ORCID-Profile: Pablo Bordón, Quim Tarrés, Mario Monzón, Rubén Paz

Förderung

  • AEI/10.13039/501100011033 and European Union "NextGenerationEU"/PRTR
  • Canary Islands Government

Zitieren

APA

Monzón, E., Bordón, P., Tarrés, Q., Monzón, M., & Paz, R. (2026). Development and Characterization of Thermomechanically Treated and Untreated Banana Rachis Fiber/PLA Composites for Material Extrusion Additive Manufacturing. Polymers, 18(9), 1144. https://doi.org/10.3390/polym18091144

Vancouver

Monzón E, Bordón P, Tarrés Q, Monzón M, Paz R. Development and Characterization of Thermomechanically Treated and Untreated Banana Rachis Fiber/PLA Composites for Material Extrusion Additive Manufacturing. Polymers. 2026;18(9):1144. doi:10.3390/polym18091144

BibTeX
@article{Monzn2026,
  author = {Monzón, Elena and Bordón, Pablo and Tarrés, Quim and Monzón, Mario and Paz, Rubén},
  title = {Development and Characterization of Thermomechanically Treated and Untreated Banana Rachis Fiber/PLA Composites for Material Extrusion Additive Manufacturing},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1144},
  doi = {10.3390/polym18091144}
}
Kostenlos starten →