EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Energy Absorption in PLA Prints Through Post-Thermal Treatment

Roberto Orduz, Brayan Murgas, Sergio G Torres-Cedillo, Jacinto Cortés-Pérez, Moises Jimenez-Martinez iD

Polymers · 06.05.2026 · 18 (9) · 1138

DOI: 10.3390/polym18091138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.05.2026. Verfasst von Roberto Orduz und 4 weiteren Autor:innen. Beteiligte Einrichtung: Tecnologico de Monterrey, School of Engineering and Sciences, Via Atlixcayotl 5718, Puebla 72453, Mexico. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Facultad de Estudios Superiores Aragón, UNAM, PAPIIT project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Energy absorption is a pivotal factor in impact mitigation, especially in engineering applications that demand lightweight and efficient mechanical absorbers. Traditionally, crash boxes are manufactured using metallic materials; however, advancements in additive manufacturing present new opportunities for producing lightweight prototypes quickly, without the need for specialized tooling. This study explores the potential of 3D-printed polylactic acid (PLA) components with tailored stiffness to optimize energy absorption performance. By combining material properties, manufacturing parameters, and design strategies, varying mechanical strengths were achieved. Furthermore, the performance of the best combination was enhanced through post-processing via thermal treatment, resulting in improved crushing metrics. Experimental results revealed a 33% increase in energy absorption for honeycomb structures with variable thickness designs, demonstrating the benefits of tailored stiffness distribution. These findings highlight the promise of variable-thickness 3D-printed composites as highly effective and customizable energy absorbers, offering innovative solutions for micromobility and other engineering applications.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingannealingcrushingenergy absorptionpost-treatment

Autor:innen und Institutionen

  • Tecnologico de Monterrey, School of Engineering and Sciences, Via Atlixcayotl 5718, Puebla 72453, Mexico.
  • X Computational Physics Division, Los Alamos National Laboratory, Los Alamos, NM 87545, USA.
  • Centro Tecnológico Aragón FES Aragón, Universidad Nacional Autónoma de México, Nezahualcóyotl 57171, Mexico.

ORCID-Profile: Moises Jimenez-Martinez

Förderung

  • Facultad de Estudios Superiores Aragón, UNAM
  • PAPIIT project

Zitieren

APA

Orduz, R., Murgas, B., Torres-Cedillo, S. G., Cortés-Pérez, J., & Jimenez-Martinez, M. (2026). Enhancing Energy Absorption in PLA Prints Through Post-Thermal Treatment. Polymers, 18(9), 1138. https://doi.org/10.3390/polym18091138

Vancouver

Orduz R, Murgas B, Torres-Cedillo SG, Cortés-Pérez J, Jimenez-Martinez M. Enhancing Energy Absorption in PLA Prints Through Post-Thermal Treatment. Polymers. 2026;18(9):1138. doi:10.3390/polym18091138

BibTeX
@article{Orduz2026,
  author = {Orduz, Roberto and Murgas, Brayan and Torres-Cedillo, Sergio G and Cortés-Pérez, Jacinto and Jimenez-Martinez, Moises},
  title = {Enhancing Energy Absorption in PLA Prints Through Post-Thermal Treatment},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1138},
  doi = {10.3390/polym18091138}
}
Kostenlos starten →