EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lifetime Prediction and Aging Characteristics of HTV-SiR Under Coupled Electro–Thermo–Hygro–Mechanical Stresses

Ben Shang iD, Wenjie Fu, Lei Yang, Qifan Yang iD, Zian Yuan, Zijiang Wang, Youping Fan iD

Polymers · 14.04.2026 · 18 (8) · 955

DOI: 10.3390/polym18080955 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.04.2026. Verfasst von Ben Shang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering and Automation, Wuhan University, Wuhan 430072, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the aging behavior of high-temperature-vulcanized silicone rubber (HTV-SiR) used in composite insulator sheds under coupled electrical, thermal, humidity, and mechanical stresses, accelerated aging tests were conducted to emulate the service conditions of ±800 kV ultra-high-voltage direct current (UHVDC) systems in Guangzhou, China. The physicochemical, mechanical, and electrical properties of the specimens were systematically characterized. The results show simultaneous degradation of both electrical and mechanical performance. In particular, the tensile strength exhibits a significant monotonic decrease and drops to 49.52% of its initial value under the most severe condition (0.5 kV·mm−1 and 5% tensile strain) after 75 days. In contrast, the DC breakdown strength shows a non-monotonic “rise-then-fall” trend and decreases more markedly with increasing tensile strain. To address the one-shot and destructive nature of tensile testing and the associated statistical uncertainties, a lifetime prediction framework was developed by integrating a generalized Eyring acceleration relation with a stochastic degradation process. Under representative service conditions of 0.09 kV·mm−1 and 0.2% tensile strain, the predicted lifetimes corresponding to failure probabilities of 10%, 75%, and 90% are 1.77, 9.08, and 17.90 years, respectively. The applicability of the model is supported by field-aged specimens. These findings provide a mechanistically grounded and reliability-oriented basis for condition assessment, lifetime-margin evaluation, material screening, and maintenance planning of UHVDC composite insulators operating in hot–humid environments.

Schlagwörter

Stichwörter der Autor:innen

composite insulatorgeneralized Eyring relationshiplifetime predictionpolymer degradationsilicone rubber

Autor:innen und Institutionen

  • School of Electrical Engineering and Automation, Wuhan University, Wuhan 430072, China.
  • Institute of Next Generation Power Systems and International Standards, Wuhan University, Wuhan 430072, China.
  • China Electric Power Research Institute, Wuhan 430072, China.
  • School of Electrical Engineering, North China University of Water Resources and Electric Power, Wuhan 430072, China.

ORCID-Profile: Ben Shang, Qifan Yang, Youping Fan

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Shang, B., Fu, W., Yang, L., Yang, Q., Yuan, Z., Wang, Z., & Fan, Y. (2026). Lifetime Prediction and Aging Characteristics of HTV-SiR Under Coupled Electro–Thermo–Hygro–Mechanical Stresses. Polymers, 18(8), 955. https://doi.org/10.3390/polym18080955

Vancouver

Shang B, Fu W, Yang L, Yang Q, Yuan Z, Wang Z, et al. Lifetime Prediction and Aging Characteristics of HTV-SiR Under Coupled Electro–Thermo–Hygro–Mechanical Stresses. Polymers. 2026;18(8):955. doi:10.3390/polym18080955

BibTeX
@article{Shang2026,
  author = {Shang, Ben and Fu, Wenjie and Yang, Lei and Yang, Qifan and Yuan, Zian and Wang, Zijiang and Fan, Youping},
  title = {Lifetime Prediction and Aging Characteristics of HTV-SiR Under Coupled Electro–Thermo–Hygro–Mechanical Stresses},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {955},
  doi = {10.3390/polym18080955}
}
Kostenlos starten →