EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of the Fibrous Network Architecture on the Mechanical Properties of Melt-Blown Non-Woven Thermoplastic Polyurethane Fabrics

Qunsong Wang, Ming Lu, Rimin Zhou, Mingkun Li, Chao Ding, Yun Liang

Polymers · 31.03.2026 · 18 (7) · 857

DOI: 10.3390/polym18070857 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 31.03.2026. Verfasst von Qunsong Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center of Papermaking and Pollution Control, South China University of Technology, Guangzhou 510641, China. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Melt-blown thermoplastic polyurethane (TPU) non-woven fabrics are increasingly valued in biomedical and industrial applications due to their elasticity, breathability, and skin compatibility. However, the relationship between their microscale fibrous network architecture and macroscopic properties remains insufficiently understood. This study investigates the influence of fiber diameter, porosity, and grammage on the mechanical properties of TPU non-woven fabrics through experimental characterization and finite element modeling (FEM). TPU pellets were melt-blown into fabrics with controlled structural variations, and their properties were analyzed using scanning electron microscopy (SEM), tensile testing, and air permeability measurements. Multiple linear regression (MLR) revealed that increased grammage predominantly enhances tensile strength (transverse β = 0.764, longitudinal β = 0.899), while fiber diameter and porosity affect transverse and longitudinal elongation in a different way. FEM simulations based on three-dimensional fiber networks further validated these relationships, demonstrating that increased porosity (e.g., from 85% to 92.5%) reduces tensile stress by over 50%, whereas larger fiber diameters (e.g., from 2 μm to 14 μm) decrease elongation at break by approximately 70%. By integrating experimental and computational approaches, this research provides valuable insights for optimizing TPU non-woven fabrics to meet specific performance requirements in wound dressings and other advanced applications.

Schlagwörter

Stichwörter der Autor:innen

finite element modelingmelt-blownmultiple linear regressionnon-woven fabricsthermoplastic polyurethane

Autor:innen und Institutionen

  • National Engineering Research Center of Papermaking and Pollution Control, South China University of Technology, Guangzhou 510641, China.
  • Kingfa Science & Technology Co., Ltd., Guangzhou 510663, China.

Zitieren

APA

Wang, Q., Lu, M., Zhou, R., Li, M., Ding, C., & Liang, Y. (2026). Influence of the Fibrous Network Architecture on the Mechanical Properties of Melt-Blown Non-Woven Thermoplastic Polyurethane Fabrics. Polymers, 18(7), 857. https://doi.org/10.3390/polym18070857

Vancouver

Wang Q, Lu M, Zhou R, Li M, Ding C, Liang Y. Influence of the Fibrous Network Architecture on the Mechanical Properties of Melt-Blown Non-Woven Thermoplastic Polyurethane Fabrics. Polymers. 2026;18(7):857. doi:10.3390/polym18070857

BibTeX
@article{Wang2026,
  author = {Wang, Qunsong and Lu, Ming and Zhou, Rimin and Li, Mingkun and Ding, Chao and Liang, Yun},
  title = {Influence of the Fibrous Network Architecture on the Mechanical Properties of Melt-Blown Non-Woven Thermoplastic Polyurethane Fabrics},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {7},
  pages = {857},
  doi = {10.3390/polym18070857}
}
Kostenlos starten →