Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance
Polymers · 31.03.2023 · 15 (7) · 1744
DOI: 10.3390/polym15071744 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 31.03.2023. Verfasst von Hafsa Jamshaid und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering and Technology, National Textile University, Faisalabad 37610, Pakistan. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Internal grant agency of Faculty of Engineering, Czech University of Life Sciences Prague, Nu-merical modelling and computational analysis of lightweight compo…, Integral Grant Agency of the Faculty of Tropical AgriSciences, Czech University of Life Sciences Prague, project "Appropriate technologies in waste and water m…, Internal grant agency of the Faculty of Engineering, Czech University of Life Sciences Prague.
Abstract (Originalsprache)
Current research deals with thermoplastic polyamide (PA6)-based composites reinforced with basalt and Kevlar fabrics. Hybrid composites were developed by altering the stacking sequence of basalt and two kinds of Kevlar fabrics. Pure-basalt- and pure-Kevlar-based samples were also developed for comparison purposes. The developed samples were evaluated with respect to mechanical and thermomechanical properties. Mechanical tests, e.g., tensile, flexural, and impact strength, were conducted along with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) to ascertain the load-bearing and high-temperature stability of the hybrid composite samples vis-à-vis pure-basalt- and Kevlar-based samples. Scanning electron microscopy (SEM) was carried out to study the nature of fracture and failure of the composite samples. The pure-basalt-based PA6 thermoplastic composites exhibited the best mechanical performance. Hybridization with basalt proved to be beneficial for improving the mechanical performance of the composites using Kevlar fabrics. However, a proper stacking sequence and density of Kevlar fabric has to be selected. The thermogravimetric analysis showed minimal weight loss for basalt-based composites. Furthermore, the thermal stability of the composites using Kevlar fabric was improved by hybridization with basalt fabric. The thermomechanical characteristics of hybrid composites may be altered by changing the stacking order of the reinforcements. Differential scanning calorimetry further established that the hybrid composites with alternate layers of basalt and Kevlar can improve the heat flow rate and enable survivability at extreme temperatures. Such novel hybrid composites can be used for high-load-bearing and high-temperature applications, e.g., defense, aerospace, automotives, and energy applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering and Technology, National Textile University, Faisalabad 37610, Pakistan.
- Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Kamycka 129, 165 00 Prague, Czech Republic.
- Department of Sustainable Technologies, Faculty of Tropical Agriscience, Czech University of Life Sciences Prague, Kamycka 129, 165 00 Prague, Czech Republic.
- Department of Mechanical and Production Engineering, Normandie Université, UNIHAVRE, LOMC, CNRS UMR 6294, 76610 Le Havre, France.
ORCID-Profile: Hafsa Jamshaid, Rajesh Kumar Mishra, Shabnam Nazari, Muhammad Shoaib, Miroslav Muller, Rostislav Choteborsky
Förderung
- Internal grant agency of Faculty of Engineering, Czech University of Life Sciences Prague, Nu-merical modelling and computational analysis of lightweight compo…
- Integral Grant Agency of the Faculty of Tropical AgriSciences, Czech University of Life Sciences Prague, project "Appropriate technologies in waste and water m…
- Internal grant agency of the Faculty of Engineering, Czech University of Life Sciences Prague
- Integral Grant Agency of the Faculty of Tropical AgriSciences, Czech University of Life Sciences Prague
- Erasmus exchange program, Normandie University, Le Havre, France
Zitieren
APA
Jamshaid, H., Mishra, R. K., Chandan, V., Nazari, S., Shoaib, M., Bizet, L., Jirku, P., Muller, M., & Choteborsky, R. (2023). Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance. Polymers, 15(7), 1744. https://doi.org/10.3390/polym15071744
Vancouver
Jamshaid H, Mishra RK, Chandan V, Nazari S, Shoaib M, Bizet L, et al. Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance. Polymers. 2023;15(7):1744. doi:10.3390/polym15071744
BibTeX
@article{Jamshaid2023,
author = {Jamshaid, Hafsa and Mishra, Rajesh Kumar and Chandan, Vijay and Nazari, Shabnam and Shoaib, Muhammad and Bizet, Laurent and Jirku, Petr and Muller, Miroslav and Choteborsky, Rostislav},
title = {Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance},
journal = {Polymers},
year = {2023},
volume = {15},
number = {7},
pages = {1744},
doi = {10.3390/polym15071744}
}
EUVIMED