EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Experimental Study of Eco-Composite Reinforced Concrete Beams Under Flexural Loading: Sustainability Factors vs. Mechanical Performance

Youssef Bounjoum iD, Oumayma Hamlaoui iD, Youssef Bibridne iD, Hakan Tozan iD, Irem Duzdar iD, Naoufal Bouktib iD, Noureddine Choab iD, Mohammed Ait El Fqih iD

Polymers · 31.03.2026 · 18 (7) · 847

DOI: 10.3390/polym18070847 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 31.03.2026. Verfasst von Youssef Bounjoum und 7 weiteren Autor:innen. Beteiligte Einrichtung: Ingénierie des Systèmes Intelligents, Industrielle et Mécanique (LISIME), ENSAM, Hassan II University of Casablanca, Casablanca 20360, Morocco. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 108 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study is an experimental study on flexural strengthening of reinforced concrete beam where three types of epoxy-bonded jacketing systems are used (glass fiber-reinforced composite (GFRC, S1), jute fiber-reinforced composite (JFRC, S2), and hybrid fiber-reinforced composite (HFRC, S3)) and an unjacketed control beam (S0). All the specimens were subjected to displacement-controlled three-point bending to measure the enhancement of strength, stiffness, and energy absorption using mass-normalized (TPM) and synthetic-content-normalized (TSM) performance indices. Jacketing compared to control also raised the maximum load from 11.80 N to 17.10 N for GFRC (+44.9%), to 14.64 N for JFRC (+24.1%), and to 14.89 N of HFRC (+26.2%). The energy taken up rose from 38.44 J (S0), 152.50 J (S1, +297%), 95.32 J (S2, +148%), and 132.79 J (S3, +245%). Flexural strength was also increased to 56.26 MPa (S1), 43.54 MPa (S2), and 51.38 MPa (S3) and yield strength was raised from 10.43 MPa (S0) to 26.40 MPa (S1), 16.84 Mpa (S2), and 23.05 Mpa (S3). The increase of flexural modulus between S0 (4871.33 MPa) and S1 (12,322.34 MPa), S2 (7862.61 MPa), and S3 (10,759.57 MPa) showed the enhancement of the stiffness. Mass-normalized performance showed great overall efficiency in the case of GFRC and HFRC, with TPM = 3.70 and 3.60 J/kg, respectively, and synthetic-content efficiency was higher in the case of JFRC, with TSM = 9.66 J/kg, which is the advantage of low-synthetic reinforcement in energy-based performance. In general, the suggested jacketing systems have a great influence on flexural responsiveness and power absorption, whereby GFRC and JFRC offer maximum capacity and stiffness, respectively, and the greatest efficiency per unit synthetic material, respectively. In terms of novelty, the paper is one of the first to measure the sustainability-based performance of an epoxy-bonded GFRC, HFRC, and bio-based JFRC jacketing, comparing the results in terms of synthetic-content efficiency (TSM) and mass-normalized indices, which reflect the energy absorption benefits per unit of synthetic material.

Schlagwörter

Stichwörter der Autor:innen

eco-compositesflexural strengtheningglass fiberhybrid FRPjute fiberreinforced concrete beamssustainability indices

Autor:innen und Institutionen

  • Ingénierie des Systèmes Intelligents, Industrielle et Mécanique (LISIME), ENSAM, Hassan II University of Casablanca, Casablanca 20360, Morocco.
  • College of Engineering and Technology, American University of the Middle East, Egaila 54200, Kuwait.
  • Department of Industrial Engineering, Faculty of Engineering, Düzce University, Düzce 81000, Türkiye.
  • Laboratoire de Sciences de l'Ingénieur, ESTEM-Casablanca, Casablanca 20060, Morocco.

ORCID-Profile: Youssef Bounjoum, Oumayma Hamlaoui, Youssef Bibridne, Hakan Tozan, Irem Duzdar, Naoufal Bouktib, Noureddine Choab, Mohammed Ait El Fqih

Zitieren

APA

Bounjoum, Y., Hamlaoui, O., Bibridne, Y., Tozan, H., Duzdar, I., Bouktib, N., Choab, N., & El Fqih, M. A. (2026). Comparative Experimental Study of Eco-Composite Reinforced Concrete Beams Under Flexural Loading: Sustainability Factors vs. Mechanical Performance. Polymers, 18(7), 847. https://doi.org/10.3390/polym18070847

Vancouver

Bounjoum Y, Hamlaoui O, Bibridne Y, Tozan H, Duzdar I, Bouktib N, et al. Comparative Experimental Study of Eco-Composite Reinforced Concrete Beams Under Flexural Loading: Sustainability Factors vs. Mechanical Performance. Polymers. 2026;18(7):847. doi:10.3390/polym18070847

BibTeX
@article{Bounjoum2026,
  author = {Bounjoum, Youssef and Hamlaoui, Oumayma and Bibridne, Youssef and Tozan, Hakan and Duzdar, Irem and Bouktib, Naoufal and Choab, Noureddine and El Fqih, Mohammed Ait},
  title = {Comparative Experimental Study of Eco-Composite Reinforced Concrete Beams Under Flexural Loading: Sustainability Factors vs. Mechanical Performance},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {7},
  pages = {847},
  doi = {10.3390/polym18070847}
}
Kostenlos starten →