Shear–Flexural Performance of Steel Fiber-Reinforced Concrete Composite Beams: Experimental Investigation and Modeling
Materials · 15.09.2025 · 18 (18) · 4322
DOI: 10.3390/ma18184322 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.09.2025. Verfasst von Qing Zhi und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Infrastructure Engineering, Nanchang University, Nanchang 330031, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangxi Province.
Abstract (Originalsprache)
Steel fiber-reinforced concrete (SFRC) exhibits superior tensile and flexural strengths, crack resistance, compressive toughness, and ductility. These characteristics make SFRC attractive for precast beam joints, shear-critical regions without stirrups, and retrofitted overlays, thereby enabling composite members. However, the shear and flexural responses of such members often differ from monolithically cast elements. To clarify these effects, nine composite specimens and one cast-in-place control were tested under four-point bending. Key parameters, including load-bearing capacity, failure evolution, and failure modes, were documented, together with load–deformation behavior, reinforcement strains, and concrete deformations. Results showed that horizontal joints reduced shear resistance and altered crack propagation compared to monolithic beams. Incorporating 1.0% hooked-end steel fibers improved both shear and flexural performance. SFRC above the joint was more effective for shear, while SFRC in both zones improved flexure. The fully SFRC specimen without stirrups achieved 63% higher shear capacity than its NC counterpart, with ductility rising from 2.2 to 3.1. A 1.0% fiber dosage provided shear resistance equivalent to D8@200 stirrups, confirming the potential of SFRC to reduce transverse reinforcement. Analytical models, including a fiber beam–column element and strut-and-tie approach, showed reasonable agreement with experiments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Infrastructure Engineering, Nanchang University, Nanchang 330031, China.
- School of Astronautics, Northwestern Polytechnical University, Xi'an 710072, China.
ORCID-Profile: Zihui Xu, Zhijun Yuan
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangxi Province
Zitieren
APA
Zhi, Q., Xu, Z., Chen, W., Zhang, H., Liu, S., & Yuan, Z. (2025). Shear–Flexural Performance of Steel Fiber-Reinforced Concrete Composite Beams: Experimental Investigation and Modeling. Materials, 18(18), 4322. https://doi.org/10.3390/ma18184322
Vancouver
Zhi Q, Xu Z, Chen W, Zhang H, Liu S, Yuan Z. Shear–Flexural Performance of Steel Fiber-Reinforced Concrete Composite Beams: Experimental Investigation and Modeling. Materials. 2025;18(18):4322. doi:10.3390/ma18184322
BibTeX
@article{Zhi2025,
author = {Zhi, Qing and Xu, Zihui and Chen, Weimin and Zhang, Huaxin and Liu, Sha and Yuan, Zhijun},
title = {Shear–Flexural Performance of Steel Fiber-Reinforced Concrete Composite Beams: Experimental Investigation and Modeling},
journal = {Materials},
year = {2025},
volume = {18},
number = {18},
pages = {4322},
doi = {10.3390/ma18184322}
}
EUVIMED