EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Novel Polyarylene Ether Nitrile/BaTiO3-Decorated WS2 Nanohybrid Crosslinked Nanocomposites for Thermal-Stable Dielectrics

Xiaohua Mao, Jingtao Zhou, Junda Wu, Siyi Chen, Pan Wang iD, Yong You

Polymers · 19.03.2026 · 18 (6) · 747

DOI: 10.3390/polym18060747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.03.2026. Verfasst von Xiaohua Mao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Pollution Control Chemistry and Environmental Functional Materials for Qinghai-Tibet Plateau of the National Ethnic Affairs Commiss…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Fundamental Research Funds for the Central Universities, Southwest Minzu University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To prepare high-temperature-resistant dielectric composite films, a novel three-dimensional nanofiller was fabricated using carboxylated polyarylene ether nitrile as a bridge, which tightly loads BaTiO3 nanoparticles onto WS2 nanosheets (WS2@BT) via in situ chemical bonding. Afterward, the WS2@BT nanofiller was introduced into the polyarylene ether nitrile (PEN) matrix, and high-temperature heat treatment was performed to form a crosslinked network, yielding CPEN/WS2@BT nanocomposites. Notably, the modified WS2@BT effectively improves the compatibility between the nanoparticles and the PEN matrix, which is superior to the compatibility of unmodified nanofillers with the matrix. Moreover, after crosslinking, CPEN/WS2@BT exhibits excellent comprehensive performance: when the filler content is 30 wt%, its glass transition temperature (Tg) reaches 257.83 °C, significantly higher than that of PEN/WS2@BT, and its dielectric constant is 193% higher than that of pure CPEN. In addition, the dielectric temperature coefficient remains below 1 × 10−3 °C−1 in the range of 25–220 °C. Overall, this work provides an effective and reliable strategy for preparing high-performance, high-temperature-resistant composite dielectric films.

Schlagwörter

Stichwörter der Autor:innen

crosslinkingdielectric filmsnanocompositespolyarylene ether nitrile

Autor:innen und Institutionen

  • Key Laboratory of Pollution Control Chemistry and Environmental Functional Materials for Qinghai-Tibet Plateau of the National Ethnic Affairs Commission, School of Chemistry and Environment, Southwest Minzu University,…
  • School of Mechanical Engineering, Chengdu University, Chengdu 610106, China.

ORCID-Profile: Pan Wang

Förderung

  • National Natural Science Foundation of China
  • the Fundamental Research Funds for the Central Universities, Southwest Minzu University

Zitieren

APA

Mao, X., Zhou, J., Wu, J., Chen, S., Wang, P., & You, Y. (2026). Novel Polyarylene Ether Nitrile/BaTiO3-Decorated WS2 Nanohybrid Crosslinked Nanocomposites for Thermal-Stable Dielectrics. Polymers, 18(6), 747. https://doi.org/10.3390/polym18060747

Vancouver

Mao X, Zhou J, Wu J, Chen S, Wang P, You Y. Novel Polyarylene Ether Nitrile/BaTiO3-Decorated WS2 Nanohybrid Crosslinked Nanocomposites for Thermal-Stable Dielectrics. Polymers. 2026;18(6):747. doi:10.3390/polym18060747

BibTeX
@article{Mao2026,
  author = {Mao, Xiaohua and Zhou, Jingtao and Wu, Junda and Chen, Siyi and Wang, Pan and You, Yong},
  title = {Novel Polyarylene Ether Nitrile/BaTiO3-Decorated WS2 Nanohybrid Crosslinked Nanocomposites for Thermal-Stable Dielectrics},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {747},
  doi = {10.3390/polym18060747}
}
Kostenlos starten →