EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Investigation of a Polyarylene Ether Nitrile Coating Material as Corrosion Protection for Metal Substrates

Yunqing Xia, Shaomu Wen, Hongfa Huang, Jin Yan, Hongjie Li, Lincai Peng iD

Materials · 29.04.2026 · 19 (9) · 1837

DOI: 10.3390/ma19091837 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.04.2026. Verfasst von Yunqing Xia und 5 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute of Natural Gas Technology, Southwest Oil & Gasfield Company, Chengdu 610213, China. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Project of CNPC, Science and Technology Project of PetroChina Southwest Oil and Gasfield Company, Research Institute of Natural Gas Technology, Science and Technology Project of CNPC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research, a novel polyarylene ether nitrile (PEN) coating material was fabricated through a facile stepwise polymerization method, which provides metallic substrates used in the oil industry with remarkable corrosion protection performance. A variety of characterization techniques were employed to evaluate the comprehensive properties of the PEN coating materials against a commercially established high-temperature-resistant epoxy coating. Based on the TGA curves, the PEN3 coating exhibited a T5% value of 521 °C, which was 44.72% higher than that of the epoxy coating. According to the tensile experiment, the PEN coatings demonstrated improved mechanical performance, achieving tensile strength and breaking elongation values of 89.37 MPa and 7.14% (PEN3), respectively, while the epoxy achieved values of 18.67 MPa and 0.32%, respectively. EIS tests revealed that all the PEN coatings exhibited superior corrosion resistance compared to the epoxy coating. Among them, the PEN3 coating remained intact without failure and showed the highest impedance value (5.665 × 107 Ω·cm2), which was two orders of magnitude higher than epoxy. Our research confirmed that the PEN coating material provided enhanced corrosion resistance, thermal stability and mechanical properties, positioning it as an alternative option to replace epoxy coating in prolonging the service life of steel piping in oil field applications.

Schlagwörter

Stichwörter der Autor:innen

corrosion resistanceepoxymechanical propertiespolyarylene ether nitrile

Autor:innen und Institutionen

  • Research Institute of Natural Gas Technology, Southwest Oil & Gasfield Company, Chengdu 610213, China.
  • Southwest Oil & Gasfield Company, Chengdu 610051, China.

ORCID-Profile: Lincai Peng

Förderung

  • Science and Technology Project of CNPC
  • Science and Technology Project of PetroChina Southwest Oil and Gasfield Company
  • Research Institute of Natural Gas Technology, Science and Technology Project of CNPC

Zitieren

APA

Xia, Y., Wen, S., Huang, H., Yan, J., Li, H., & Peng, L. (2026). Development and Investigation of a Polyarylene Ether Nitrile Coating Material as Corrosion Protection for Metal Substrates. Materials, 19(9), 1837. https://doi.org/10.3390/ma19091837

Vancouver

Xia Y, Wen S, Huang H, Yan J, Li H, Peng L. Development and Investigation of a Polyarylene Ether Nitrile Coating Material as Corrosion Protection for Metal Substrates. Materials. 2026;19(9):1837. doi:10.3390/ma19091837

BibTeX
@article{Xia2026,
  author = {Xia, Yunqing and Wen, Shaomu and Huang, Hongfa and Yan, Jin and Li, Hongjie and Peng, Lincai},
  title = {Development and Investigation of a Polyarylene Ether Nitrile Coating Material as Corrosion Protection for Metal Substrates},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1837},
  doi = {10.3390/ma19091837}
}
Kostenlos starten →