EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Hardness, Microstructure, and Mechanical Properties of Goat Horn Powder–Reinforced Wood-like Polyurethane Composites

Lokman Yünlü iD

Polymers · 17.03.2026 · 18 (6) · 723

DOI: 10.3390/polym18060723 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.03.2026. Verfasst von Lokman Yünlü. Beteiligte Einrichtung: Department of Mechanical Engineering, Engineering Faculty, Burdur Mehmet Akif Ersoy University, 15030 Burdur, Turkey. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effect of goat horn powder (GHP) reinforcement on the hardness, microstructure, and mechanical properties of wood-like polyurethane composites. GHP, a keratin-based animal waste, was incorporated into the polyurethane matrix at weight fractions of 5, 10, 15, 20, and 25 wt.%. The mechanical behavior was evaluated through tensile, three-point bending, Charpy impact, and Shore D hardness tests, complemented by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses. Results indicate that GHP significantly enhances impact resistance, with 10 wt.% loading achieving a 140% improvement in impact energy compared to the neat matrix. Tensile stress improved by 12.89% at 5 wt.% loading. However, reinforcement levels exceeding 10–15 wt.% led to a decline in tensile and flexural performance due to particle agglomeration and weak interfacial adhesion. Shore D hardness increased systematically with higher GHP content across all ratios. The study demonstrates that GHP is a functional, sustainable reinforcing element that improves toughness and hardness while supporting environmental waste management.

Schlagwörter

Stichwörter der Autor:innen

composite materialsgoat horn powdermechanical analysismicrostructurewood-like polyurethane

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Engineering Faculty, Burdur Mehmet Akif Ersoy University, 15030 Burdur, Turkey.

ORCID-Profile: Lokman Yünlü

Zitieren

APA

Yünlü, L. (2026). Investigation of Hardness, Microstructure, and Mechanical Properties of Goat Horn Powder–Reinforced Wood-like Polyurethane Composites. Polymers, 18(6), 723. https://doi.org/10.3390/polym18060723

Vancouver

Yünlü L. Investigation of Hardness, Microstructure, and Mechanical Properties of Goat Horn Powder–Reinforced Wood-like Polyurethane Composites. Polymers. 2026;18(6):723. doi:10.3390/polym18060723

BibTeX
@article{Ynl2026,
  author = {Yünlü, Lokman},
  title = {Investigation of Hardness, Microstructure, and Mechanical Properties of Goat Horn Powder–Reinforced Wood-like Polyurethane Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {723},
  doi = {10.3390/polym18060723}
}
Kostenlos starten →