Hygrothermal Ageing of Glass and Carbon Fibre Composites Manufactured Using Different Resin Systems
Polymers · 12.03.2026 · 18 (6) · 696
DOI: 10.3390/polym18060696 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 12.03.2026. Verfasst von Zaneta Senselova und 7 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, ARC, Natural Science and Engineering Research Council (NSERC) of Canada.
Abstract (Originalsprache)
This study investigates the degradation mechanisms of glass-fibre- and carbon-fibre-reinforced polymer (GFRP and CFRP, respectively) composites fabricated either with epoxy, vinyl-ester, or bio-epoxy resins under a hygrothermal environment. Composite laminates were manufactured using the vacuum-assisted resin infusion technique and exposed to high moisture and elevated in-service temperatures of 23 °C (room temperature), 40 °C and 60 °C for up to 125 days. Changes in the physical, microstructural, chemical and mechanical properties were then assessed. CFRP and GFRP composites showed distinct differences in their hygrothermal ageing depending on the resin system used in the manufacturing. CFRP composites consistently demonstrated higher stability than GFRP composites. Epoxy resin exhibited high resistance to water absorption and hydrolysis under hygrothermal exposure. After 125 days at 60 °C, glass/epoxy (GE) and carbon/epoxy (CE) composites retained 79.0% and 72.1% of their tensile strength and 46.9% and 72.6% of their interlaminar shear strength (ILSS), respectively. Vinyl-ester composites showed high mechanical retention, with glass/vinyl-ester (GV) and carbon/vinyl-ester (CV) retaining 70.8% and 83.1% of tensile strength and 67.5% and 80.3% of ILSS, respectively. Despite this mechanical stability, evidence of hydrolysis indicated ongoing chemical degradation of the vinyl-ester resin under prolonged hygrothermal exposure. In contrast, bio-epoxy composites exhibited relatively low overall durability. Glass/bio-epoxy (GB) retained 126.5% tensile strength and 68.8% ILSS, whereas carbon/bio-epoxy retained 61.0% tensile strength and 44.3% ILSS after 125 days at 60 °C. Overall, fibre and resin types were found to have a significant effect on the hygrothermal ageing of polymer composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia.
- College of Engineering, United Arab Emirates University, Abu Dhabi P.O. Box 15551, United Arab Emirates.
- Public Works Research Institute, Tsukuba 305-8516, Ibaraki, Japan.
- School of Engineering, Royal Melbourne Institute of Technology University, GPO Box 2476, Melbourne, VIC 3001, Australia.
- Department of Civil and Building Engineering, University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada.
ORCID-Profile: Abdullah Iftikhar, Kate Nguyen
Förderung
- Australian Research Council
- ARC
- Natural Science and Engineering Research Council (NSERC) of Canada
- RTP stipend research scholarship
- UniSQ International fees scholarship from the University of Southern Queensland
- Australian Composites Manufacturing CRC for conducting her PhD
Zitieren
APA
Senselova, Z., Manalo, A., Iftikhar, A., Alajarmeh, O., Ramakrishnan, S., Sakuraba, H., Nguyen, K., & Benmokrane, B. (2026). Hygrothermal Ageing of Glass and Carbon Fibre Composites Manufactured Using Different Resin Systems. Polymers, 18(6), 696. https://doi.org/10.3390/polym18060696
Vancouver
Senselova Z, Manalo A, Iftikhar A, Alajarmeh O, Ramakrishnan S, Sakuraba H, et al. Hygrothermal Ageing of Glass and Carbon Fibre Composites Manufactured Using Different Resin Systems. Polymers. 2026;18(6):696. doi:10.3390/polym18060696
BibTeX
@article{Senselova2026,
author = {Senselova, Zaneta and Manalo, Allan and Iftikhar, Abdullah and Alajarmeh, Omar and Ramakrishnan, Saya and Sakuraba, Hiroki and Nguyen, Kate and Benmokrane, Brahim},
title = {Hygrothermal Ageing of Glass and Carbon Fibre Composites Manufactured Using Different Resin Systems},
journal = {Polymers},
year = {2026},
volume = {18},
number = {6},
pages = {696},
doi = {10.3390/polym18060696}
}
EUVIMED