EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Visualizing pseudo‐ductility in carbon/glass fiber hybrid composites manufactured using infusible thermoplastic Elium® resin

Tayyab Khan, Muhammad A. Ali, Muhammad S. Irfan, Wesley J. Cantwell, Umer Rehan

Polymer Composites · 2023-03 · 44 (3) · 1859-1876

DOI: 10.1002/pc.27210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 15.12.2022. Verfasst von Tayyab Khan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Khalifa University of Science, Technology and Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, two different type of glass and carbon fiber hybrid laminates were manufactured using a low‐viscosity thermoplastic resin that is, Elium®. A detailed microstructure visualization study was conducted using X‐ray computed tomography (XCT) analysis. The viscoelastic properties were examined through dynamic mechanical analysis. The mechanical performance was investigated through flexural and tensile tests along with a fractographic study using optical and scanning electron microscopy. The XCT analysis revealed a weak interface between the Elium® resin and the glass fabric, with glass fiber specimens exhibiting a void content of 1.24%, in contrast to the carbon fiber specimens which showed void content of only 0.28%. Therefore, adding glass fabric layers in the hybrid laminates increased the void content, which had a negative impact on the overall mechanical performance. The average flexural strength of the hybrid specimen having G 2 C 4 G 2 stacking sequence was observed to be 254% higher than pure GFRPC specimens. Similarly, the tensile strength and Young's modulus of the same hybrid specimen showed 155% and 380% increases, respectively, compared to the GFRPC specimens. This increase was primarily due to higher stiffness of the carbon fibers and their better fiber – matrix interface. Whereas the tensile strain of the hybrid specimen having G 3 C 2 G 3 stacking sequence was 37% higher than that of the CFRPC specimens. The SEM images highlighted fiber fracture and brittle failure modes in the carbon fiber specimens, in contrast to fiber pullout, interfacial failure, poor fiber‐matrix bonding and ductile failure modes in the glass fiber specimens.

Förderung

  • Khalifa University of Science, Technology and Research

Zitieren

APA

Khan, T., Ali, M. A., Irfan, M. S., Cantwell, W. J., & Rehan, U. (2023). Visualizing pseudo‐ductility in carbon/glass fiber hybrid composites manufactured using infusible thermoplastic Elium® resin. Polymer Composites, 44(3), 1859-1876. https://doi.org/10.1002/pc.27210

Vancouver

Khan T, Ali MA, Irfan MS, Cantwell WJ, Rehan U. Visualizing pseudo‐ductility in carbon/glass fiber hybrid composites manufactured using infusible thermoplastic Elium® resin. Polymer Composites. 2023;44(3):1859-1876. doi:10.1002/pc.27210

BibTeX
@article{Khan2023,
  author = {Khan, Tayyab and Ali, Muhammad A. and Irfan, Muhammad S. and Cantwell, Wesley J. and Rehan, Umer},
  title = {Visualizing pseudo‐ductility in carbon/glass fiber hybrid composites manufactured using infusible thermoplastic Elium® resin},
  journal = {Polymer Composites},
  year = {2023},
  volume = {44},
  number = {3},
  pages = {1859--1876},
  doi = {10.1002/pc.27210}
}
Kostenlos starten →