Polyethylene Recovery from Multilayer Plastic Packaging Waste
Polymers · 05.03.2026 · 18 (5) · 638
DOI: 10.3390/polym18050638 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 05.03.2026. Verfasst von Anareth Cavuquila und 5 weiteren Autor:innen. Beteiligte Einrichtung: CICECO-Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FCT/MCTES, ALiCE.
Abstract (Originalsprache)
Multilayer plastic packaging waste (MPPW) represents a major challenge for waste management due to its widespread use in single-use applications and its complex, heterogeneous structure. Variations in polymer composition, layer thickness and number of layers significantly hinder conventional recycling processes, leading most MPPW to be disposed of through landfilling or incineration. This study presents the development and optimization of a dissolution–precipitation process using toluene to recover polyethylene (PE) from MPPW. The proposed method successfully produced PE with less than 5 wt% polypropylene (PP), meeting common recycling quality requirements. Design of experiments (DoEs) combined with response surface methodology (RSM) was applied to evaluate the influence of key operating parameters, including temperature, dissolution time, solvent to waste ratio and agitation speed, to identify optimal processing conditions. The results demonstrated that temperature had the most significant influence on both dissolution yield and polymer purity. Optimal conditions of 100 °C, 30 min, 400 rpm, and a solvent-to-waste ratio of 15 mL/g resulted in a total recovery yield of 39.1% with a polymer composition of 97.7 wt% PE and 2.3 wt% PP. Owing to the use of established and scalable unit operations, the process shows strong potential for industrial-scale implementation without requiring complex or specialized infrastructure.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CICECO-Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal.
- LEPABE, ALiCE, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal.
- CERES, Department of Chemical Engineering, Faculty of Sciences and Technology, University of Coimbra, Rua Sílvio Lima, Polo II, 3030-790 Coimbra, Portugal.
- i9Green, Av. D. José Alves Correia da Silva, Edifício Vela Sul 2° D, Rotunda Sul, Cova da Iria, 2495-402 Fátima, Portugal.
ORCID-Profile: Anareth Cavuquila, Luanna Maia, Inês Portugal, Carlos M Silva, Ana Barros-Timmons
Förderung
- FCT/MCTES
- ALiCE
Zitieren
APA
Cavuquila, A., Maia, L., Carreira, G. A., Portugal, I., Silva, C. M., & Barros-Timmons, A. (2026). Polyethylene Recovery from Multilayer Plastic Packaging Waste. Polymers, 18(5), 638. https://doi.org/10.3390/polym18050638
Vancouver
Cavuquila A, Maia L, Carreira GA, Portugal I, Silva CM, Barros-Timmons A. Polyethylene Recovery from Multilayer Plastic Packaging Waste. Polymers. 2026;18(5):638. doi:10.3390/polym18050638
BibTeX
@article{Cavuquila2026,
author = {Cavuquila, Anareth and Maia, Luanna and Carreira, Germano A and Portugal, Inês and Silva, Carlos M and Barros-Timmons, Ana},
title = {Polyethylene Recovery from Multilayer Plastic Packaging Waste},
journal = {Polymers},
year = {2026},
volume = {18},
number = {5},
pages = {638},
doi = {10.3390/polym18050638}
}
EUVIMED