EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fluidized-bed gasification of aluminum-containing plastic waste originating from multilayer packaging materials

Esa Kurkela, Minna Kurkela, Ilkka Hiltunen

Journal of Material Cycles and Waste Management · 2026-07 · 28 (4) · 3047-3065

DOI: 10.1007/s10163-026-02594-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Material Cycles and Waste Management, online erschienen am 07.05.2026. Verfasst von Esa Kurkela und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical Research Centre of Finland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

At present, polymer barrier-coated packaging board waste is processed with other paperboard waste, where the cellulose fiber fraction is separated through a re-pulping process and recycled, while the residual plastic-rich fraction containing aluminum is combusted for energy production. This paper reports on experimental research on gasification of aluminum-containing plastic reject for the generation of synthesis gas, which can subsequently be converted to methanol and then olefins, used as feedstock in polymer manufacturing. Gasification experiments were performed using a bench-scale bubbling fluidized bed gasifier equipped with a hot filter and catalytic reformer. The temperature for gasification was 650–670 °C to avoid aluminum melting in the gasifier. Sand was used as the initial bed material. Aluminum was separated in the filter unit, and the tar and hydrocarbon-containing gas that passed through the filter was sent to the catalytic reformer. The gasifier operated efficiently and achieved over 99% carbon conversion during testing. Raw gas was successfully filtered at approximately 500 °C, and the hydrocarbon-rich raw gas was subsequently converted to synthesis gas in the catalytic reformer. Analysis of the extracted filter dust revealed significant aluminum content, suggesting potential opportunities for aluminum recovery.

Förderung

  • Technical Research Centre of Finland

Zitieren

APA

Kurkela, E., Kurkela, M., & Hiltunen, I. (2026). Fluidized-bed gasification of aluminum-containing plastic waste originating from multilayer packaging materials. Journal of Material Cycles and Waste Management, 28(4), 3047-3065. https://doi.org/10.1007/s10163-026-02594-4

Vancouver

Kurkela E, Kurkela M, Hiltunen I. Fluidized-bed gasification of aluminum-containing plastic waste originating from multilayer packaging materials. Journal of Material Cycles and Waste Management. 2026;28(4):3047-3065. doi:10.1007/s10163-026-02594-4

BibTeX
@article{Kurkela2026,
  author = {Kurkela, Esa and Kurkela, Minna and Hiltunen, Ilkka},
  title = {Fluidized-bed gasification of aluminum-containing plastic waste originating from multilayer packaging materials},
  journal = {Journal of Material Cycles and Waste Management},
  year = {2026},
  volume = {28},
  number = {4},
  pages = {3047--3065},
  doi = {10.1007/s10163-026-02594-4}
}
Kostenlos starten →