Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)
Polymers · 22.01.2026 · 18 (2) · 302
DOI: 10.3390/polym18020302 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 22.01.2026. Verfasst von Ângela Rodrigues und 5 weiteren Autor:innen. Beteiligte Einrichtung: UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia (FCT, I.P.), CEMMPRE, CDRSP.
Abstract (Originalsprache)
Additive manufacturing has been widely adopted in industry as an alternative to traditional manufacturing processes for complex component production. In fact, a diverse range of materials, particularly polymers, can be processed using 3D printing for biomechanical applications (e.g., prosthetics). However, in-depth evaluation of these materials is necessary to determine their suitability for demanding applications, such as those involving cyclic loading. Following previous work that studied Polylactic Acid (PLA) and Polyethylene Terephthalate Glycol-modified (PETG) under experimental fatigue testing, this study examines the fatigue behaviour of other current 3D-printed polymeric materials, namely Acrylonitrile Styrene Acrylate (ASA), Polycarbonate (PC), Polyamide 12 (Nylon 12), and Polycarbonate–Acrylonitrile Butadiene Styrene (blend) (PC-ABS), for which fatigue data remain limited or even non-existent. The findings revealed performance differences on Tensile Strength (σR), Young’s Modulus and Ultimate Strain among tensile specimens made from these materials and characterised S-N curves for both high-cycle (HCF) and low-cycle (LCF) fatigue regimes at room temperature, with a tensile load ratio (R = 0.05). These results establish relationships among fatigue limit and quasi-static mechanical properties, namely 25% × σr for ASA (8 MPa), 7% × σr for PC (3.6 MPa), 17% × σr for Nylon 12 (7.4 MPa), and 15% × σr for PC-ABS (4.7 MPa), as well as between mechanical properties and preliminary potential biomechanical applications. Main conclusions were further supported by micro-computed tomography (micro-CT), which revealed levels of porosity in between 4% and 11%, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal.
- CEMMPRE, ARISE, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, Pinhal de Marrocos, 3030-788 Coimbra, Portugal.
- Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Rua de Portugal, 2430-028 Marinha Grande, Portugal.
- Department of Mechanical Engineering, Coimbra Polytechnic-ISEC, Rua Pedro Nunes, 3030-199 Coimbra, Portugal.
- Laboratório Associado de Sistemas Inteligentes, LASI, 4800-058 Guimarães, Portugal.
ORCID-Profile: Ricardo Branco, Rui Silva, Cândida Malça, Rui F Martins
Förderung
- Fundação para a Ciência e a Tecnologia (FCT, I.P.)
- CEMMPRE
- CDRSP
- ARISE
Zitieren
APA
Rodrigues, Â., Branco, R., Franco, M., Silva, R., Malça, C., & Martins, R. F. (2026). Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF). Polymers, 18(2), 302. https://doi.org/10.3390/polym18020302
Vancouver
Rodrigues Â, Branco R, Franco M, Silva R, Malça C, Martins RF. Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF). Polymers. 2026;18(2):302. doi:10.3390/polym18020302
BibTeX
@article{Rodrigues2026,
author = {Rodrigues, Ângela and Branco, Ricardo and Franco, Margarida and Silva, Rui and Malça, Cândida and Martins, Rui F},
title = {Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)},
journal = {Polymers},
year = {2026},
volume = {18},
number = {2},
pages = {302},
doi = {10.3390/polym18020302}
}
EUVIMED