EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Thermal Annealing on Optical Properties and Surface Morphology of a Polymer: Fullerene- and Non-Fullerene-Blend Films Used in Organic Solar Cells

Bożena Jarząbek iD, Muhammad Raheel Khan, Barbara Hajduk iD, Andrzej Marcinkowski iD, Paweł Chaber, Adrian Cernescu iD, Yasin C Durmaz iD

Polymers · 20.01.2026 · 18 (2) · 280

DOI: 10.3390/polym18020280 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.01.2026. Verfasst von Bożena Jarząbek und 6 weiteren Autor:innen. Beteiligte Einrichtung: Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Sklodowskai-Curie 34 Str., 41-819 Zabrze, Poland. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology, Poland and Green and Digital Economy implementation of a project at Joint Doctoral School, Silesian University of Technology…, the Polish Ministry of Science and Higher Education project: Support for research and development with the use of research infrastructure of the National Synch…, European Funds.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The optical properties, electronic structure and morphology of thin films of the polymer donor PTB7-Th blended with either the fullerene acceptor PC70BM or the non-fullerene acceptor ZY-4Cl were systematically investigated to evaluate their annealing-induced evolution. Thin films were characterized using UV–Vis–NIR absorption spectroscopy, spectroscopic ellipsometry, ATR-FTIR spectroscopy, atomic force microscopy (AFM), and nano-IR analysis. In situ stepwise thermal annealing revealed distinct changes in absorption edge parameters, indicating thermally induced modifications in the electronic structure of the blend films. Ellipsometric analysis showed that elevated temperatures significantly affect the refractive index and extinction coefficient spectra. AFM measurements demonstrated markedly different surface morphology evolution for the two blend systems, with pronounced needle-shaped crystallites formation observed in PTB7-Th:ZY-4Cl films after annealing at 100 °C. Nano-IR characterization identified these crystallites as predominantly PTB7-Th, indicating phase separation driven by thermal treatment. The combined optical and structural results reveal distinct annealing-induced changes in the blend. Finally, BHJ solar cells, based on PTB7-Th:PC70BM and PTB7-Th:ZY-4Cl active layers, were fabricated, and their photovoltaic response was demonstrated.

Schlagwörter

Stichwörter der Autor:innen

AFM and Nano-IR studiesPC70BMPTB7-ThUV-VIS-NIR and ellipsometric analysisZY-4Cldonor–acceptor blend filmsneedle-shape crystallites

Autor:innen und Institutionen

  • Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Sklodowskai-Curie 34 Str., 41-819 Zabrze, Poland.
  • Joint Doctoral School, Silesian University of Technology, Akademicka 2A, 44-100 Gliwice, Poland.
  • Attocube systems AG, Eglfinger Weg 2, 85540 Munich, Germany.

ORCID-Profile: Bożena Jarząbek, Barbara Hajduk, Andrzej Marcinkowski, Adrian Cernescu, Yasin C Durmaz

Förderung

  • Silesian University of Technology, Poland and Green and Digital Economy implementation of a project at Joint Doctoral School, Silesian University of Technology…
  • the Polish Ministry of Science and Higher Education project: Support for research and development with the use of research infrastructure of the National Synch…
  • European Funds

Zitieren

APA

Jarząbek, B., Khan, M. R., Hajduk, B., Marcinkowski, A., Chaber, P., Cernescu, A., & Durmaz, Y. C. (2026). The Effect of Thermal Annealing on Optical Properties and Surface Morphology of a Polymer: Fullerene- and Non-Fullerene-Blend Films Used in Organic Solar Cells. Polymers, 18(2), 280. https://doi.org/10.3390/polym18020280

Vancouver

Jarząbek B, Khan MR, Hajduk B, Marcinkowski A, Chaber P, Cernescu A, et al. The Effect of Thermal Annealing on Optical Properties and Surface Morphology of a Polymer: Fullerene- and Non-Fullerene-Blend Films Used in Organic Solar Cells. Polymers. 2026;18(2):280. doi:10.3390/polym18020280

BibTeX
@article{Jarzbek2026,
  author = {Jarząbek, Bożena and Khan, Muhammad Raheel and Hajduk, Barbara and Marcinkowski, Andrzej and Chaber, Paweł and Cernescu, Adrian and Durmaz, Yasin C},
  title = {The Effect of Thermal Annealing on Optical Properties and Surface Morphology of a Polymer: Fullerene- and Non-Fullerene-Blend Films Used in Organic Solar Cells},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {2},
  pages = {280},
  doi = {10.3390/polym18020280}
}
Kostenlos starten →