EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Organic Electrochemical Transistors Based on Blend Films with Thermoresponsive Polymer

Shunsuke Yamamoto iD, Shuhei Kindaichi, Ryosuke Matsubara iD, Atsushi Kubono iD, Rajiv Giridharagopal iD, David S Ginger iD, Masaya Mitsuishi iD

Small · 2025-06 · 21 (25)

DOI: 10.1002/smll.202501927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 10.05.2025. Verfasst von Shunsuke Yamamoto und 6 weiteren Autor:innen. Beteiligte Einrichtung: Graduate School of Engineering, Tohoku University, 6-6-11 Aramaki Aza Aoba, Aoba-ku, Sendai, 980-8579, Japan. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Science Foundation, National Nanotechnology Coordinated Infrastructure, JSPS KAKENHI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Organic electrochemical transistors (OECTs) are biocompatible devices with significant potential for biosensing. Functionalizing the channel layers is essential for improving the selectivity and sensitivity of OECT‐based biosensors. A straightforward one‐step fabrication method for these functionalized channel layers can simplify the production process for these devices. This study developed OECT devices based on a polymer blend of poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) and poly( N ‐isopropylacrylamide) (PNIPAM) that respond to temperature changes. Structural analyses of the blended films showed that hole transport through PEDOT is maintained even after blending, and the PNIPAM is segregated at the surface. To overcome the large chain conformational change that occurs with temperature changes, a flexible poly(ethylene glycol) diglycidyl ether (PEGDE) crosslinker is used in addition to the conventional crosslinker, (3‐glycidyloxypropyl)trimethoxysilane (GOPS). As a result, the PEGDE + GOPS binary crosslinker system exhibited reversible responses to temperature cycling. These results highlight two key considerations when designing a functional mixed‐conductor film based on a polymer blend system: (1) vertical phase separation and (2) proper crosslinker selection.

Schlagwörter

Stichwörter der Autor:innen

crosslinkermixed‐conducting polymerorganic electrochemical transistorsurface segregationthermoresponsive polymer

Autor:innen und Institutionen

  • Graduate School of Engineering, Tohoku University, 6-6-11 Aramaki Aza Aoba, Aoba-ku, Sendai, 980-8579, Japan.
  • Graduate School of Engineering, Kyoto University, Katsura, Nishikyo-ku, Kyoto, 615-8510, Japan.
  • Department of Electronics and Materials Science, Shizuoka University, Hamamatsu, 432-8561, Japan.
  • Department of Chemistry, University of Washington, Seattle, Washington, 98195, USA.

ORCID-Profile: Shunsuke Yamamoto, Ryosuke Matsubara, Atsushi Kubono, Rajiv Giridharagopal, David S Ginger, Masaya Mitsuishi

Förderung

  • National Science Foundation
  • National Nanotechnology Coordinated Infrastructure
  • JSPS KAKENHI
  • Amano Institute of Technology
  • Toyota Physical and Chemical Research Institute

Zitieren

APA

Yamamoto, S., Kindaichi, S., Matsubara, R., Kubono, A., Giridharagopal, R., Ginger, D. S., & Mitsuishi, M. (2025). Organic Electrochemical Transistors Based on Blend Films with Thermoresponsive Polymer. Small, 21(25). https://doi.org/10.1002/smll.202501927

Vancouver

Yamamoto S, Kindaichi S, Matsubara R, Kubono A, Giridharagopal R, Ginger DS, et al. Organic Electrochemical Transistors Based on Blend Films with Thermoresponsive Polymer. Small. 2025;21(25). doi:10.1002/smll.202501927

BibTeX
@article{Yamamoto2025,
  author = {Yamamoto, Shunsuke and Kindaichi, Shuhei and Matsubara, Ryosuke and Kubono, Atsushi and Giridharagopal, Rajiv and Ginger, David S and Mitsuishi, Masaya},
  title = {Organic Electrochemical Transistors Based on Blend Films with Thermoresponsive Polymer},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {25},
  doi = {10.1002/smll.202501927}
}
Kostenlos starten →