EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Jute–Glass Ratio Effects on the Mechanical, Thermal, and Morphological Properties of PP Hybrid Composites for Sustainable Automotive Applications

Tunahan Özyer iD, Emre Demirci iD

Polymers · 17.12.2025 · 17 (24) · 3335

DOI: 10.3390/polym17243335 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.12.2025. Verfasst von Tunahan Özyer und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Bursa Technical University, Bursa 16310, Türkiye. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 93 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates polypropylene (PP)–based biocomposites reinforced with systematically varied jute and glass fiber ratios as sustainable, lightweight alternatives for semi-structural automotive parts. Four formulations (J20/G0, J15/G5, J10/G10, J5/G15) with a constant 20 wt% total fiber were produced by injection molding and characterized through mechanical, thermal, and morphological analyses. Tensile, flexural, and Charpy impact tests showed progressive improvements in strength, stiffness, and energy absorption with increasing glass fiber content, while ductility was maintained or slightly enhanced. SEM revealed a transition from fiber pull-out in jute-rich systems to fiber rupture and stronger matrix adhesion in glass-rich hybrids. Thermal analyses confirmed the benefits of hybridization: heat deflection temperature increased from 75 °C (J20/G0) to 103 °C (J5/G15), and thermogravimetry indicated improved stability and higher char residue. DSC showed negligible changes in crystallization and melting, confirming that fiber partitioning does not significantly affect PP crystallinity. Benchmarking demonstrated mechanical and thermal performance comparable to acrylonitrile–butadiene–styrene (ABS) and acrylonitrile–styrene–acrylate (ASA), widely used in automotive components. Finally, successful molding of a prototype exterior mirror cap from J20/G0 validated industrial processability. These findings highlight jute–glass hybrid PP composites as promising, sustainable alternatives to conventional engineering plastics for automotive engineering applications.

Schlagwörter

Stichwörter der Autor:innen

automotive applicationscharacterizationhybrid biocompositesjute–glass fiberspolypropylene compositessustainable materials

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Bursa Technical University, Bursa 16310, Türkiye.
  • R&D Center, TOFAS Turkish Automobile Factory, Bursa 16110, Türkiye.
  • Automotive Application and Research Center, Bursa Technical University, Bursa 16310, Türkiye.

ORCID-Profile: Tunahan Özyer, Emre Demirci

Zitieren

APA

Özyer, T., & Demirci, E. (2025). Evaluation of Jute–Glass Ratio Effects on the Mechanical, Thermal, and Morphological Properties of PP Hybrid Composites for Sustainable Automotive Applications. Polymers, 17(24), 3335. https://doi.org/10.3390/polym17243335

Vancouver

Özyer T, Demirci E. Evaluation of Jute–Glass Ratio Effects on the Mechanical, Thermal, and Morphological Properties of PP Hybrid Composites for Sustainable Automotive Applications. Polymers. 2025;17(24):3335. doi:10.3390/polym17243335

BibTeX
@article{zyer2025,
  author = {Özyer, Tunahan and Demirci, Emre},
  title = {Evaluation of Jute–Glass Ratio Effects on the Mechanical, Thermal, and Morphological Properties of PP Hybrid Composites for Sustainable Automotive Applications},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {24},
  pages = {3335},
  doi = {10.3390/polym17243335}
}
Kostenlos starten →