EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Pinecone—Cottonseed Hybrid Composites: Mechanical, Physical, Thermal, and Morphological Performance

Md Imranul Islam, Jennifer Harmon, Md Nazif Hasan Chowdhury, Md Mahmudul Hasan Mollah, Afnan Islam

Journal of Composites Science · 24.07.2026 · 10 (8) · 385

DOI: 10.3390/jcs10080385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 24.07.2026. Verfasst von Md Imranul Islam und 4 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Family and Consumer Sciences graduate research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing generation of agricultural and industrial waste has created a growing need for sustainable materials that can reduce environmental burdens while maintaining desirable performance. This study explores the development of hybrid composites using pinecone waste and cottonseed waste generated during spinning operations as reinforcement materials in epoxy and PCL (polycaprolactone) matrices. Four composite formulations were produced and evaluated in terms of their physical, mechanical, thermal, morphological, and crystallographic characteristics. Density, water absorption, tensile, compressive, flexural, and thermal conductivity properties were measured using standard testing procedures. Surface morphology and fiber–matrix interactions were examined through scanning electron microscopy (SEM), while X-ray diffraction (XRD) was used to investigate the crystalline structure of the composites. The epoxy-based formulations exhibited superior tensile and flexural performance, reduced moisture uptake, and lower thermal conductivity, indicating their suitability for interior and semi-structural applications. In comparison, the PCL-based composites demonstrated higher compressive load resistance and greater deformation capability, suggesting potential use in biodegradable packaging and cushioning materials. SEM analysis revealed noticeable differences in filler distribution and interfacial characteristics among the formulations, whereas XRD confirmed the crystalline features associated with both the polymer matrices and lignocellulosic reinforcements. Overall, the results demonstrate a practical route for converting forestry residues and spinning-industry waste into functional composite materials, supporting waste valorization and resource-efficient material development.

Förderung

  • Department of Family and Consumer Sciences graduate research

Zitieren

APA

Islam, M. I., Harmon, J., Chowdhury, M. N. H., Mollah, M. M. H., & Islam, A. (2026). Sustainable Pinecone—Cottonseed Hybrid Composites: Mechanical, Physical, Thermal, and Morphological Performance. Journal of Composites Science, 10(8), 385. https://doi.org/10.3390/jcs10080385

Vancouver

Islam MI, Harmon J, Chowdhury MNH, Mollah MMH, Islam A. Sustainable Pinecone—Cottonseed Hybrid Composites: Mechanical, Physical, Thermal, and Morphological Performance. Journal of Composites Science. 2026;10(8):385. doi:10.3390/jcs10080385

BibTeX
@article{Islam2026,
  author = {Islam, Md Imranul and Harmon, Jennifer and Chowdhury, Md Nazif Hasan and Mollah, Md Mahmudul Hasan and Islam, Afnan},
  title = {Sustainable Pinecone—Cottonseed Hybrid Composites: Mechanical, Physical, Thermal, and Morphological Performance},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {8},
  pages = {385},
  doi = {10.3390/jcs10080385}
}
Kostenlos starten →