EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Interfacial and Mechanical Properties of Carbon Fiber/Poly (Ether Ether Ketone) Composites via Bisphenol-Based Polyimide Modification

Aylin Albayrak iD, Mustafa Dogu iD, Mustafa Cakir iD, Kadir Turhan iD

Polymers · 07.12.2025 · 17 (24) · 3258

DOI: 10.3390/polym17243258 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.12.2025. Verfasst von Aylin Albayrak und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Faculty of Arts and Sciences, Yildiz Technical University, Davutpasa Campus, Esenler, 34220 Istanbul, Türkiye. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Scientific and Technological Research Council of Türkiye (TÜBİTAK), Scientific and Technological Research Council of Türkiye, Mir Arastirma ve Gelistirme Inc..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the synthesis of two new bisphenol-based polyimide (PI) sizing agents to improve the fiber–matrix interface of carbon fiber-reinforced poly (ether ether ketone) (CF/PEEK) composites. One of the synthesized polyimides contains bisphenol A (BPA) monomer, while the other has bisphenol S (BPS) monomer. The produced polyimide precursor resins were coated with carbon fibers by thermal imidization. The thermal, thermomechanical, and mechanical properties of the CF/PEEK composites produced by the autoclave process were investigated. According to the mechanical test results, there was a balanced performance between the BPS-containing polyimide-coated composites (CF-PEEK-PI-S) and the BPA-containing polyimide-coated composites (CF-PEEK-PI-A). While tensile strength is 291 MPa and interlaminar shear (ILSS) strength is 119 MPa, the CF-PEEK-PI-A sample showed superior mechanical properties in flexural (92.1 MPa) and compressive strength (54.9 MPa). As a result, it was concluded that bisphenol-based polyimide coatings significantly improve the interfacial interactions in CF/PEEK composites, which have great potential in aerospace, automotive and advanced engineering applications.

Schlagwörter

Stichwörter der Autor:innen

bisphenol-based monomerscarbon fiber compositesinterfacial adhesionpoly (ether ether ketone)polyimide sizing

Autor:innen und Institutionen

  • Department of Chemistry, Faculty of Arts and Sciences, Yildiz Technical University, Davutpasa Campus, Esenler, 34220 Istanbul, Türkiye.
  • Research Department, Mir Arastirma ve Gelistirme Inc., Esenyurt, 34220 Istanbul, Türkiye.
  • Department of Materials and Metallurgical Engineering, Marmara University, Maltepe, 34854 Istanbul, Türkiye.

ORCID-Profile: Aylin Albayrak, Mustafa Dogu, Mustafa Cakir, Kadir Turhan

Förderung

  • The Scientific and Technological Research Council of Türkiye (TÜBİTAK)
  • Scientific and Technological Research Council of Türkiye
  • Mir Arastirma ve Gelistirme Inc.

Zitieren

APA

Albayrak, A., Dogu, M., Cakir, M., & Turhan, K. (2025). Enhancing Interfacial and Mechanical Properties of Carbon Fiber/Poly (Ether Ether Ketone) Composites via Bisphenol-Based Polyimide Modification. Polymers, 17(24), 3258. https://doi.org/10.3390/polym17243258

Vancouver

Albayrak A, Dogu M, Cakir M, Turhan K. Enhancing Interfacial and Mechanical Properties of Carbon Fiber/Poly (Ether Ether Ketone) Composites via Bisphenol-Based Polyimide Modification. Polymers. 2025;17(24):3258. doi:10.3390/polym17243258

BibTeX
@article{Albayrak2025,
  author = {Albayrak, Aylin and Dogu, Mustafa and Cakir, Mustafa and Turhan, Kadir},
  title = {Enhancing Interfacial and Mechanical Properties of Carbon Fiber/Poly (Ether Ether Ketone) Composites via Bisphenol-Based Polyimide Modification},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {24},
  pages = {3258},
  doi = {10.3390/polym17243258}
}
Kostenlos starten →