Comparative Mechanical Response of PLA Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes and Halloysite Nanotubes Processed by Injection Moulding
Polymers · 27.11.2025 · 17 (23) · 3149
DOI: 10.3390/polym17233149 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.11.2025. Verfasst von Christian Cobos und 4 weiteren Autor:innen. Beteiligte Einrichtung: Grupo de Investigación en Nuevos Materiales y Procesos de Transformación GiMaT, Universidad Politécnica Salesiana, Cuenca 010107, Ecuador. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polylactic acid (PLA) is a biodegradable polymer with an ever-increasing number of applications, although its inherent brittleness limits its performance somewhat in structural applications. In this study, we analysed the influence of incorporating multi-walled carbon nanotubes (MWCNTs) and halloysite nanotubes (HNTs) at different concentrations (0.5, 0.75 and 1 wt%) on the mechanical properties of injection-moulded PLA nanocomposites. The effects of the nanofillers were characterised by tensile, flexural, and impact tests, hardness measurements, and FESEM examination. The results showed that MWCNTs increased the flexural strength and stiffness by up to 60% compared to neat PLA (84.3 vs. 52.6 MPa), although this was accompanied by a reduction in elongation at break (from 2.30% to 1.57%) due to agglomeration. Conversely, HNTs improved the elongation at break up to 6.39%, enhanced flexural strength by approximately 62% (85.1 MPa), and maintained stiffness around 3.0 GPa, indicating a better balance between strength and ductility. The FESEM micrographs confirmed the presence of clusters in MWCNTs and a more homogeneous dispersion in HNTs, thus explaining the differences in behaviour. Overall, MWCNTs are more suitable for applications requiring high stiffness and strength, whereas HNTs are preferable when greater ductility and impact resistance are required.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Grupo de Investigación en Nuevos Materiales y Procesos de Transformación GiMaT, Universidad Politécnica Salesiana, Cuenca 010107, Ecuador.
- Instituto Universitario de Investigación en Tecnología de Materiales (IUTM), Universitat Politècnica de València, Plaça Ferrándiz i Carbonell sn, 03801 Alcoi, Alicante, Spain.
- Grupo de Investigación de Física GIF, Universidad Politécnica Salesiana, Cuenca 010107, Ecuador.
ORCID-Profile: Christian Cobos, Santiago Ferrándiz, Emilio Rayón, Luis M López-López, Luis Garzón
Zitieren
APA
Cobos, C., Ferrándiz, S., Rayón, E., López-López, L. M., & Garzón, L. (2025). Comparative Mechanical Response of PLA Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes and Halloysite Nanotubes Processed by Injection Moulding. Polymers, 17(23), 3149. https://doi.org/10.3390/polym17233149
Vancouver
Cobos C, Ferrándiz S, Rayón E, López-López LM, Garzón L. Comparative Mechanical Response of PLA Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes and Halloysite Nanotubes Processed by Injection Moulding. Polymers. 2025;17(23):3149. doi:10.3390/polym17233149
BibTeX
@article{Cobos2025,
author = {Cobos, Christian and Ferrándiz, Santiago and Rayón, Emilio and López-López, Luis M and Garzón, Luis},
title = {Comparative Mechanical Response of PLA Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes and Halloysite Nanotubes Processed by Injection Moulding},
journal = {Polymers},
year = {2025},
volume = {17},
number = {23},
pages = {3149},
doi = {10.3390/polym17233149}
}
EUVIMED