Multimatrix Composite Materials for Rocket Nozzle Manufacturing: A Comparative Review
Polymers · 04.11.2025 · 17 (21) · 2946
DOI: 10.3390/polym17212946 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 04.11.2025. Verfasst von Mohammed Meiirbekov und 7 weiteren Autor:innen. Beteiligte Einrichtung: JSC "National Center of Space Research and Technology", Almaty 050010, Kazakhstan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 175 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
Rocket engine nozzle blocks operate under extreme thermal and oxidative loads, requiring materials with high temperature resistance, dimensional stability, and a predictable lifetime without active cooling. This review provides a comparative overview of multimatrix composite materials-including C/C, C/SiC, SiC/SiC, MMC, and polymer-based ablative systems-representing the full spectrum of materials used in non-cooled rocket nozzles. The study highlights the evolutionary continuum from polymeric ablative systems to carbon, ceramic, and metallic matrices, demonstrating how each class extends operational limits in temperature capability, reusability, and structural integrity. Polymer and ablative composites serve as the foundation of thermal protection through controlled ablation and insulation, while carbon- and ceramic-based systems ensure long-term performance at ultra-high temperatures (>1600 °C). MMCs bridge these classes by combining strength, impact toughness, and thermal conductivity in transition zones. Particular attention is given to manufacturing technologies such as PIP, CVI, LPI, RS, powder metallurgy, casting, diffusion bonding, and filament winding, emphasizing their effect on microstructure, porosity, and lifetime. A practical selection matrix linking nozzle zones, mission profiles, and composite types is proposed, outlining trade-offs among performance, mass, lifetime, and manufacturability, and guiding the design of next-generation thermal protection and propulsion systems based on the multimatrix concept.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- JSC "National Center of Space Research and Technology", Almaty 050010, Kazakhstan.
- Faculty of Mechanics and Mathematics, Al-Farabi Kazakh National University, Almaty 050040, Kazakhstan.
ORCID-Profile: Mohammed Meiirbekov, Mukhammed Sadykov, Assem Kuandyk, Laura Mustafa
Förderung
- The Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Meiirbekov, M., Sadykov, M., Kuandyk, A., Nurguzhin, M., Janikeyev, M., Gulmaira, P., Mustafa, L., & Yesbolov, N. (2025). Multimatrix Composite Materials for Rocket Nozzle Manufacturing: A Comparative Review. Polymers, 17(21), 2946. https://doi.org/10.3390/polym17212946
Vancouver
Meiirbekov M, Sadykov M, Kuandyk A, Nurguzhin M, Janikeyev M, Gulmaira P, et al. Multimatrix Composite Materials for Rocket Nozzle Manufacturing: A Comparative Review. Polymers. 2025;17(21):2946. doi:10.3390/polym17212946
BibTeX
@article{Meiirbekov2025,
author = {Meiirbekov, Mohammed and Sadykov, Mukhammed and Kuandyk, Assem and Nurguzhin, Marat and Janikeyev, Marat and Gulmaira, Partizan and Mustafa, Laura and Yesbolov, Nurmakhan},
title = {Multimatrix Composite Materials for Rocket Nozzle Manufacturing: A Comparative Review},
journal = {Polymers},
year = {2025},
volume = {17},
number = {21},
pages = {2946},
doi = {10.3390/polym17212946}
}
EUVIMED