EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Manufacturing of Experimental Solid Propellant Rocket Motor Cases Made of Carbon Composite Materials

Berdiyar Baiserikov, Marat Ismailov, Laura Mustafa iD, Nurmakhan Yesbolov, Arman Kulbekov iD, Abussaid Yermekov iD, Mohammed Meiirbekov iD, Ilyas Ablakatov

Polymers · 15.05.2025 · 17 (10) · 1352

DOI: 10.3390/polym17101352 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.05.2025. Verfasst von Berdiyar Baiserikov und 7 weiteren Autor:innen. Beteiligte Einrichtung: JSC National Center of Space Research and Technology, Almaty 050010, Kazakhstan. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan, Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates a polymer composite and carbon fiber impregnated with epoxy resin for the fabrication of a lightweight and high-strength composite casing for rocket propulsion systems. It describes the winding technology which uses a removable mandrel and angular winding at ±55° and ±20° to expand the stress distribution, as well as alternating angles of ±45° and 80° to improve resistance to tensile and torsional loads. A fixture has been developed that ensures ease of disassembly and good strength of the final products. Hydrostatic tests showed the operational stability of the casings under internal pressure up to 10 MPa for a 1.5 mm-thick casing and 18 MPa for a 3 mm-thick casing, which confirms the effectiveness of the proposed technology. The research results demonstrate the high reliability and potential exploitation of composite materials.

Schlagwörter

Stichwörter der Autor:innen

carbon fiberepoxy resinfilament windingpolymer composite materialsolid propellant rocket motorstrength

Autor:innen und Institutionen

  • JSC National Center of Space Research and Technology, Almaty 050010, Kazakhstan.

ORCID-Profile: Laura Mustafa, Arman Kulbekov, Abussaid Yermekov, Mohammed Meiirbekov

Förderung

  • Ministry of Science and Higher Education of the Republic of Kazakhstan
  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Baiserikov, B., Ismailov, M., Mustafa, L., Yesbolov, N., Kulbekov, A., Yermekov, A., Meiirbekov, M., & Ablakatov, I. (2025). Design and Manufacturing of Experimental Solid Propellant Rocket Motor Cases Made of Carbon Composite Materials. Polymers, 17(10), 1352. https://doi.org/10.3390/polym17101352

Vancouver

Baiserikov B, Ismailov M, Mustafa L, Yesbolov N, Kulbekov A, Yermekov A, et al. Design and Manufacturing of Experimental Solid Propellant Rocket Motor Cases Made of Carbon Composite Materials. Polymers. 2025;17(10):1352. doi:10.3390/polym17101352

BibTeX
@article{Baiserikov2025,
  author = {Baiserikov, Berdiyar and Ismailov, Marat and Mustafa, Laura and Yesbolov, Nurmakhan and Kulbekov, Arman and Yermekov, Abussaid and Meiirbekov, Mohammed and Ablakatov, Ilyas},
  title = {Design and Manufacturing of Experimental Solid Propellant Rocket Motor Cases Made of Carbon Composite Materials},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {10},
  pages = {1352},
  doi = {10.3390/polym17101352}
}
Kostenlos starten →